Door Alignment - GE Profile 42 Owner's Manual And Installation Instructions

Built-in side by side refrigerators
Table of Contents

Advertisement

Available languages

Available languages

14 START ICE MAKER
Green Power Light
• Flip the switch to I (ON). The icemaker will begin
operation automatically.
• Make sure nothing interferes with the sweep
of the feeler arm.
• Discard the first full bucket of ice cubes.
• To turn the icemaker off, set the switch to
O (OFF).
15 INSTALL TOEKICK
• Locate the supplied toekick (shipped taped
Supplied Toekick
to the top of the refrigerator). Install with
2 screws provided.
• The vented toekick must remain unobstructed for
proper air flow.
Installation Instructions
Power Switch
Feeler Arm

16 DOOR ALIGNMENT

• Stand back from the refrigerator to inspect
the door alignment.
• Shipping or the addition of heavy door panels
may have caused the doors to move slightly
out of alignment.
• If necessary, the Fresh Food door
may be adjusted up or down to align
with the Freezer door.
• Loosen the leveling mechanism.
• Use a 7/32" wrench to adjust the hinge pin
as shown.
• Tighten the leveling mechanism.
IMPORTANT NOTE: After the unit has been leveled,
if the fresh food door is higher than the freezer
door, adjust the front right leveling leg lower
to align the doors and, if required, raise the left
leveling leg to level the unit side to side.
40
Bushing
g e
D o o r H i n
g e
C a s e H i n
7/32" Wrench
Raise
Clockwise

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psb42lgrbvPsb42lgrwvPsb48lgrbvPsb48lgrwvProfile 48

Table of Contents