Saving A Frame From A Movie As A Still Image - Nikon COOLPIX S9600 Reference Manual

B
Notes About Movie Editing
Use a sufficiently charged battery to prevent the camera from turning off during
editing.
A movie that was created by editing cannot be trimmed again.
The actual trimmed portion of a movie may differ slightly from the portion selected
using the start and end points.
Movies cannot be trimmed so that they are less than two seconds long.

Saving a Frame from a Movie as a Still Image

The desired frame of a recorded movie can be extracted and saved as a still
image.
Pause a movie and display the frame to be
extracted (A77).
Use the multi selector JK to select the H
control and press the k button.
Select Yes when a confirmation dialog is
displayed, and press the k button to save the
image.
The image quality of the saved still image is
normal (compression ratio of approximately
1:8). The image size is determined by the type
(image size) (E54) of the original movie.
For example, a still image saved from a movie
recorded with e 1080/30p (or S 1080/25p) is n (1920 × 1080
pixels).
B
Notes About Saving Still Images
Frames of HS movies and movies recorded with Z 1080/60i (U 1080/50i) or
g 480/30p (W 480/25p) (E54) cannot be saved as still images.
E28
Copy this frame as a still image?
Yes
No
1m30s 1m30s
1m30s 1m30s