Main Switch And Feed Dip Button - Husqvarna 1200 Service Manual

The hook
Requirements
The tip of the hook (A) and surface (B) must not
be damaged.
Action
Exchange the damaged hook.
The driver
Requirements
The surface of the driver against the hook must not
be damaged, worn or uneven in any way which might
hinder the passage of the thread.
Action
Damaged hook is to be exchanged (P.52).
The main switch and feed dip button
If the main switch or the feed dip button doesn't work
satisfactorily, remove the rear cover and front panel, (P.44).
Exchange the complete unit or spring (A).
10 Husqvarna service manual 104 72 30-26
SEWKNITWORLD