Cruise Control System - BYD F6 Owner's Manual

BYD AUTO

Cruise control system

Cruise control system can keep the setting
speed over 40 km/h and it isn't necessary to
step the acceleration pedal. When driving on
the erect and unblocked highway, you can
use the function. Don't suggest using the
function on the sinuous road, wet and
slippery road, and rain day or at the
condition of other bad climate as well as in
the downtown. When encountering the
condition, you should self-operate the
vehicle.
Friendly tips
Improperly using the cruise control
system will be able to cause the
accident.
Only use the cruise control system in
the fine climate and on the unblocked
highway.
Start cruise control
Deceleration/ set button Acceleration/RESbutton
Cancel button
Cruise control main
button
1 ． Press the cruise control main button
(ON/OFF), the indicator light of cruise
control system will be on.
2．Lift the speed to the desired speed (over
40 km/h).
3．Press the (-/SET) button, to start the

cruise control system.

When you are going up and down a hill, the
cruise control system can't hold the setting
71
F6 OWNER'S MANUAL
speed. When the speed increase going down
a hill. Use the brakes to slow down, this will
cancel the cruise control. If need use the
setting speed, press the (+/RES) button to
automatically accelerate to set speed.
When you are going up a steep hill,
automatic transmission will lower the gear
to keep the setting speed.
Change speed setting
Can increase the setting cruising speed in
any of following ways：
1．Hold the (+/RES) button, vehicle will
continuously accelerate, when reaching the
desired speed, release the button.
2．Push the accelerator pedal, accelerate to
the desired speed, press the (-/SET) button.
3． To increase the speed in very small
amounts, repeat tap the (+/RES) button.
Each time you do this, the vehicle will
speed up about 1.6km/h.