Light - BYD F6 Owner's Manual

BYD AUTO
chains is quite worse. Some chains may also
damage vehicle's tire, wheel, suspension
and body. You should choose with chains to
make enough free space between tire and
other parts in the wheel cowl. Look over
and read parts assembly graph and other
instructions of chain factory carefully.
Before you want to buy chains and install
them on the vehicle, you should refer to
BYD authorized service station.
After installing the chains, the speed driving
on the ice and snow pavement should be
below 30 km/h. To furthest lighten the
werainf of tires and chains, you should
avoid driving with the tire installed chains
on the pavement without ice and snow.

Light

Headlight aiming
When the vehicle left the factory, the
headlight aiming has been finished. If often
catch heavy with the trunk, the headlight
need aim anew. The headlight aiming must
be finished by the BYD AUTO company or
other qualified technicians.
Replacing the bulb of headlight
There are both headlight halogen bulbs at
the both sides of the vehicle. Replacing the
bulb, hold its steel bottom mount, avoid the
skin or hard thing touching the bulb, if you
have touched bulb, clean
metamorphic alcohol and clean dishcloth.
Notice
When the headlight is on, it will get
scorching. The grease, sweat or scratch
on the surface of bulb will cause the
crack for overheating.
126
F6 OWNER'S MANUAL
High beam
1．Pull out the key from the ignition switch,
open the engine hood. If need replace the
bulb of driver side, should disassemble the
battery. To replace the bulb of driver side,
it with
make the next step.