Engine Hood Lock; Spark Plug (4G69S4M Model) - BYD F6 Owner's Manual

BYD AUTO

Engine hood lock

Use mellow detergent to clean the latch
assembly of hood, and
multipurpose lubricating oil. All active parts
(showing as graph), including pivot, need to
wipe lubricating oil. If you can't clean the
latch and wipe lubricating oil by yourself,
you should contact with BYD authorized
service station.

Spark plug (4G69S4M model)

Replacing
Replace vehicle's spark plug according
recommended driving time and mileage in
the periodical maintenance schedule.
1 ． Clean up dunghill and oil crust
aggregating around the ignition coil.
then wipe
2 ． Press the lock plunger and nip the
connector, pull off the lead connector on the
ignition coil. Notice; nip the plastic end of
connector, not the lead.
3．Disassemble the fixed ignition coil bolt
with wrench; pull out the ignition coil
lightly.
115
F6 OWNER'S MANUAL
4．Get down the spark plug with spark plug
sleeve.
5． Put new spark plug into spark plug sleeve,
then install it into spark plug hole, screw
down it by hand to avoid tripping off.
6．Screw down the spark plug with torque
wrench (If you don't have torque wrench,
screw down two thirds circle after spark
plug is touching the head).
Tighten torque: 25Nm