BYD F6 Owner's Manual page 54

BYD AUTO
The methods and steps to adjust interior
rearview mirror:
1. Before adjusting, pay attention for the
following three points: When the direction
displayed by the interior rear view mirror is
the vehicle head direction, the state is called
normal display status. Under adjusting, the
words displayed by the interior rearview
mirror is only to give you a tip, not meaning
it is in the vehicle head direction , the state
is called adjusting display state:
You'd better use the clip；
When adjusting, you should choose a square,
closed-loop street or a annular roadway
(turnplate), and confirm the east, south,
west and north (as in the illustration).
2. Adjusting steps:
The first step：start the vehicle, the words
will be displayed in the top right corner of
interior rearview mirror, the word may be
one of east, west, south, north, northwest,
southwest, northeast and southeast.
The second step：Choose the start direction.
It can be one of ease, west, south and north.
The third step： Use clip to press the ―OK‖
button on the back of rear view mirror to
enter into adjusting state.
The screen will appear ―north‖ and flash for
two times, and then stop.
The fourth step ： Drive the car for two
circles at a slow speed, less than 8Km/h
(notice: when driving, you can't make the
car flameout).
49
The fifth step ： Adjusting vehicle head
make it point to south. Press the ―OK‖, and
the screen appear the ―south‖, then press the
―OK‖ again.
If ―south‖ appears and flash for two times,
then stop, the adjusting is finished. It will
automatically quit the adjusting state and
enter into normal state.
If not, the second times you press ―OK‖ and
―west‖ appears, you should firstly flameout,
and repeat adjustment from the first step. If
Screen
it displays other words, it is not necessary to
flameout, you can repeat adjustment from
the second step.
The sixth step：Test. After finishing the
adjustment, drive the car for a circle to test
whether the displayed direction is right. If it
is wrong, then repeat adjustment from the
first step.
F6 OWNER'S MANUAL
Screen