BYD F6 Owner's Manual page 41

BYD AUTO
LOCK (0)—You can insert or remove the
key only in this position. To turn the key
from ACCESSORY (Ⅰ) to LOCK (0), you
must push the key in slightly. For a A/T
vehicle, to remove the key, we suggest you
put the shift lever in Park or neutral position.
The parking lock will lock the steering
wheel after you remove the key.
If the front wheels are turned, the anti-theft
lock may make it difficult to turn the key
from LOCK (0) to ACCESSORY (Ⅰ).
Firmly turn the steering wheel to the left or
to the right as you turn the key
Friendly tips
Do not remove the key from the
ignition switch, otherwise the steering
wheel will be locked and the vehicle
may be out of control.
Before removing the key from the
ignition switch, make sure the car is
stopped completely.
ACCESSORY (Ⅰ)—You can operate
the audio system and the cigarette
lighter.
ON (Ⅱ)—This is the normal key
position when driving. Several of the
indicators on the instrument panel come
on to verify proper function when you
turn the ignition switch from the
ACCESSORY (I) to the ON (II)
position.
36
F6 OWNER'S MANUAL
START (Ⅲ)—Use this position only to
start the engine. The switch returns to the
ON (II) position when you let go of the key.
A reminder beeper sounds if the ignition
switch is in the LOCK (0) or ACCESSORY
(I) position when you open the driver's door.
Remove the key from the ignition switch to
turn off the beeper.
Power door lock
Each front door has a power door lock
master switch. Either switch locks and
unlocks all doors. Push the top of the switch
to lock all doors; push the bottom of switch
to unlock them.