High Mount Brake Light; Emergency Flashers - BYD F3DM Owner's Manual

High / low beams – For high beams,
turn the headlights on and push the
level away from you (position 1). Pull
the level toward you (position 2) for low
beams.
The headlight beam indicator light
(blue light) on the instrument panel will
tell you that the high beams are on,
Flashing the high beam headlights
(position 3) -- pull the lever all the way
back. The high beam headlights turn
off when you release the lever,
You can flash the high beam headlights
使用手册小330.indd 67
F3DM Owner's Manual
even with the knob turned to "OFF".
Turn Signals
To signal a right steering, push up your
left handle to position1; to signal a left
steering, push down your left handle to
position1.
The DM system must be in the "IG-ON"
mode.
The lever automatically returns after
you make a turn, but you may have
to return it by hand after you change
lanes,
To signal a lane change, move the
lever up or down to the pressure point
(position 2) and hold it.
If the turn signal indicator lights (green
lights) on the instrument panel flash
faster than normal, a front or rear turn
signal bulb is burned out.

High Mount Brake Light

When you step on brake pedal, the
light comes on together with the rear
brake light, warning that the car is in
braking to prevent accidents.

Emergency Flashers

To turn on emergency flashers, just
push this switch as shown on the
- 67 -
2011-4-13 18:36:45