4.5.2 OPC Server Example (Reading an analog input value)
The following is an example of reading analog values from an I-87018 inserted in slot 0 of an
8410/8810.
Step 1: Run the DCON Utility to configure the I/O modules
Step 2: Run the OPC Server to search for I/O modules on COM1
Step 3: Save the configuration and close the OPC Server
Step 4: Run SCADA software to connect to the OPC Server
The OPC Server user's manual lists the procedures for the following SCADA software:
Please refer to "Chapter 4 Connecting to the OPC Server" for more details.
1
2
3
■
■
LabVIEW
National
■
■
iFix
InduSoft
RU-87P1/2/4/8 User Manual, Version: 1.2
■
WIZCON
■
Citect
50