Wiring The I/O Modules; Fig.6：Plug In The I/O Structure - ICP DAS USA RU-87P1 User Manual

I-87019R is auto-configured:
Baud Rate: 115200
Checksum: Disable
Net Address: 2
Net Address: 1

2.1.6 Wiring the I/O modules:

Before wiring the I-87K I/O modules, please check the pin assignment and wiring according
to each hardware user manual.
For each I-87K I/O module's hardware user manual please refer to
CD:\Napdos\DCON\IO_Module\87k_modules.htm
According to the internal circuitry diagram and wire connection diagram, please connect the
power cable or communication cable to each channel on terminal block of I/O module.
Slot: 0
2
Fig.6：Plug in the I/O structure
After plugged in, the slot indicator is
flashing per 100 ms.
When configuration is completed, the LED
becomes off.
If configuration is failed, the LED is
always on.
RU-87P1/2/4/8 User Manual, Version: 1.2
1 2 3
3 4 5
12