87Pn Auto Config. Enable; Fig.14：When Auto Config. Enable, Incorrect Module Can't External Communication; Fig.15：Click "Write To 87Pn" To Complete 87Pn Module Configuration - ICP DAS USA RU-87P1 User Manual

3.1.1 87Pn Auto Config. Enable:

In Fig.12 "Auto Config. ON" expressed that the 87Pn's Auto-Configuration function is
"enable", "off" means "disable".
Working Distinction:
If I-87K I/O modules didn't pass the 87Pn correct setup, and install into expansion slot
under "Auto Config. Enable" mode, it will regard as incorrect module. For guarantee
system's normal operation, the 87Pn will forbid this module external communication. You
can't search and configure I/O modules directly by DCON Utility.
The "Auto Config. Enable [X,X,X,X]" in Status column means the module configuration of
that slot is not completed or corrected. Click "RU-87P4" and select "Configure Module" to
enter configure screen and know the detail settings about module.
Fig.14：When Auto Config. Enable, incorrect module can't external communication
In 87Pn configure screen, you can see the scanned module name in "Scanned I/O on
Slot" column. Click "Set As Scanned" button to assign module name and click "configure" to
setup the I/O module according to the user demand. Finally click "write to 87Pn" for the
settings to take effect.
Fig.15：Click "Write to 87Pn" to complete 87Pn module configuration
RU-87P1/2/4/8 User Manual, Version: 1.2
1
2
3
19