3.2.1 Save the module command to file:
When all modules has configured properly according to the requirement, because each time
entered the configuration screen will delete the default file and re-build, so suggestion to
save the settings as another files, if the settings is carelessly changed or need to duplicate
the same content of configure, can load in the configure file and write in 87Pn CPU module
through operation screen of DCON Utility.
The operation steps is very easy, using "Configure" to setup each I/O module and write the
settings to 87Pn, then click "Save Configuration" button and input the description or notes for
this configuration file. Finally, input the file name of this project to complete. Please refer to
the description as following diagram.
1
Fig. 20:Click "Configure" to enter the configure screen
Fig. 21:Select and setup the measurement range of module
23
RU-87P1/2/4/8 User Manual, Version: 1.2