Indusoft Example (Reading An Analog Input Value) - ICP DAS USA RU-87P1 User Manual

Reversion.txt: contains the reversion information, including
Bugs fixed
New modules supported
Step 2: Install the InduSoft bundled driver by executing
CD:\Napdos\Driver\DCON_InduSoft\Setup\setup.exe
Step 3: Read the manuals describing how to start
The DCON.pdf user's manual describes how to use the InduSoft bundled driver
Step 4: Run the demo programs (ICPDriverTest.zip) to test I/O modules and learn the
functions

4.4.2 InduSoft Example (Reading an analog input value)

The following is an example of reading analog values from an I-87018 inserted in slot 0 of an
8410/8810.
Step 1: Run the DCON Utility to configure the I/O modules
Step 2: Run InduSoft and create a new project
Step 3: Include the DCON driver
Step 4: 設定 DCON 驅動程式
1
RU-87P1/2/4/8 User Manual, Version: 1.2
2
4
3
46