Chapter 3
Software Configuration
In this chapter, we will use DCON Utility to complete software configuration of the
RU-87Pn, please confirm the hardware equipment has connected and communication
parameters of 87Pn CPU module has setup completes. (Please refer to
3.1
Setup RU-87Pn with DCON Utility
3.2
Save & Load 87Pn configure file
3.3
Load & Write configure file
3.4
Operating in off-line mode
3.1 Setup RU-87Pn with DCON Utility
At first, please run DCON Utility then click "COM Port" to select COM Port and baud rate.
You can check your PC's "Device Manager" to know which COM is connecting. Click "OK"
to confirm and escape the screen.
1
You can check your
PC's "Device Manager"
to know which COM is
connecting.
2
Fig.13:Run DCON Utility and Module Configuration
RU-87P1/2/4/8 User Manual, Version: 1.2
Chapter
2)
17