Fig.16:The status after complete the 87Pn module configuration
As above, the I-87K I/O modules on 87Pn expansion slot has configured correctly by
"DCON Utility", and then search the module again, you can see the module appear in the
search screen. The "Auto Config. Enable [0,0,0,0]" of "Status", means "The I/O
configuration of each slot is correct. Each plugged I/O module will be listed under the
RU-87Pn.
Fig.17:After configuring, you can find out the entire module
If the module passed correct configuration, some day when module damage, you don't
need to shutdown the power, just remove the damaged module and install the same model
number of new module. You needn't configure it again, 87Pn will write the previous settings
to the module automatically.
20
RU-87P1/2/4/8 User Manual, Version: 1.2