Table of Contents
Advertisement
In 87Pn "Auto- Config. Disable" mode, doesn't support Auto-Configuration. When module
damage, and replace another same model number the module directly, because of their
settings (e.g. Type code) may be different, thus can't ensure its normal working. The user
must use DCON Utility to re-configure based on the setting value, and replies the normal
operation.
Note：In DCON Utility search screen, the message in status column of 87Pn
The meaning of " Auto Config. Enable [0,X,0,0] " as following description:：
0：Means the module configuration on this slot is successful or have no module.
X：Means the module configuration on this slot is uncorrected.
If the status column of 87Pn shows "Auto Config. Enable [0,0,0,0]", means the "Auto
Config." of DIP switch is switching to the "On", and the I/O configuration of each slot is
correct or has no module.
If the status column of 87Pn shows "Auto Config. Disable [0,0,0,0], means the "Auto
Config." of DIP switch is switching to the "Off", and the I/O configuration of each slot can
initialization success or have no module.
3.2 Save & Load 87Pn Configure file
When using 87Pn operation screen of DCON Utility to configure the I-87K I/O module,
DCON Utility will automatically save the necessary information under the installing path
"config\", the file recording some information of related module that will be saved in 87pn,
when save as new file, it can be use for system recover and system backup. The related
format and detail about configure file, please refer to Appendix D. Here, just description how
to save the file as oneself needs and how to load from files.
Note1:
When user open the operation interface of 87Pn, if there is the same file in default
path will be deleted.
Note2:
Using "Configure" and "Write To 87Pn" functions in 87Pn operation screen of DCON
Utility will automatically save the related data of module of each slot as filename of
fixed format and the same path, if user want to use the file as system recover,
system backup or remote support, the best way is save the default file as another
name to avoid the file been deleted when next time you open the operation
interface of 87Pn.
RU-87P1/2/4/8 User Manual, Version: 1.2
22
Advertisement
Table of Contents
