Initial phone settings
You need to set certain parameters before you can use some of the
phone's features. You can also personalise your phone by changing
settings such as the ring tone or melody, ring level or display light.
See 'Personalising your phone' on page 33.
Master reset
If you make changes and then decide that you do not want to keep
those changes, you can reset your phone to the default factory
settings. To do this:
Locking and unlocking your phone
Keypad lock
Phone lock
The Phone lock protects the phone against unauthorised use in the
event of theft. It is not on when you purchase the phone.
1. Open the SETTINGS menu and select
Master reset.
2. Enter your phone lock code and press
YES. (The default code is 0000).
Use the SETTINGS menu to lock the
keypad on your phone so keys cannot
be accidentally pressed. See 'Using the
key lock' on page 79 for instructions
on locking and unlocking the keypad.
Use the ACCESS menu to set a Phone lock
or Key lock code, to change your code, lock
your SIM card, or to bar certain incoming or
outgoing calls. See 'Using the phone lock'
on page 78 for detailed instructions.
Initial phone settings
29