Table of Contents
Advertisement
MENU SCREENS
SETUP
BLUE SCREEN
TXT LANGUAGE
ASPECT
CH
ADJUST
SELECT
OSD
LANGUAGE
HPOS
VPOS
DURATION
CH
HALF TONE
ADJUST
SELECT
PC
CONTRAST
BRIGHTNESS
HPOS
CH
VPOS
CLOCK
PHASE
AUTO CONFIG
ADJUST
SELECT
NOTE:
If the set is cold ,there may be a small¡ ° flicker¡ ± when the set is switched on. It is normal, There is nothing
wrong with the set.
If possible, use the VESA 1024X768@60HZ video mode to obtain the best image quality for your LCD monitor.
Under other resolutions some scaled or processed pictures may appear on the screen.
Some dot defects may appear on the screen, like red, green or blue Spots, However,this will have no impact or
effect on the monitor performance.
Do not press the LCD screen with your finger for a long time as it may incur some damage to the screen.
18
ON
WEST
16:9
EXIT
ENGLISH
EXIT
EXIT
SETUP MENU
BULE SCREEN: You can set background ON or OFF.
TXT LANGUAGE.
You can choose the supported teletext
fonts among AUTO,WEST,RUSSIAN,ARABIC and FARSI.
ASPECT: You can set the picture display mode 16:9,
4:3 ,ZOOM,and 16:9FS,PANORAMA.
OSD MENU
You can choose the language, adjust the H-position,
V-position, duration and halftone.
PC MENU(under PC mode only)
You can adjust the CONTRAST, BRIGHTNESS
HPOS/VPOS Press the VOL+/- buttons to adjust the
picture Horizontal and Vertical position.
CLOCK Press the VOL+/- to minimize any vertical bars or
stripes visible on the screen background.
PHASE When necessary, adjust the pixel phase of the
picture to avoid picture interference.
AUTO CONFIG To adjust the screen
position automatically. It will take a few seconds and
during this process the screen will be black.
Advertisement
Table of Contents
