Introduction Features • Remote controlled colour LCD TV. Please read the corresponding instructions of this handbook prior to the fi rst usage of the device, even • Fully integrated Terrestrial digital TV (DVB-T - when the usage of electronic devices is familiar MPEG2) to you.
Safety Precautions Heat and Flames The set should not be placed near to Read the following recommended safety open fl ames and sources of intense heat precautions carefully for your safety. such as an electric heater. Ensure that Power no open fl ame sources, such as lighted •...
The Standby Off/On button doesn´t separate this Headphone Volume device completely from mains. Moreover the device Excessive sound pressure from earphones consumes power in the standby operation. In order to and headphones can cause hearing loss. separate the device completely from mains, the mains plug has to be pulled from the mains socket.
Package Contents Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy effi ciency feauture of this TV. INFO To reduce energy consumption, you should take the SLEEP...
Remote Control Buttons Standby Image size/ Expand (in TXT mode) Sleep timer Numeric buttons Return / Exit (in DTV mode) / Index page (in TXT mode) Cursor up / Page up (in TXT mode) Cursor left Programme up (Page down in DTV mode) Programme down (Page up in DTV mode) Mono-Stereo / Dual I-II / Current language Previous Programme / Swap...
LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby Off/On button 2. TV/AV button 3. Programme Up/Down buttons- Volume Up/Down buttons Note:You can use +/- buttons to change volume. If you want to change channels, press P/V/ AV button once and then use +/- buttons.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input DC 12 V Input is used for connecting the supplied power adaptor. Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to.
Using Digital Multimedia Using Side AV Connectors Connectors You can connect a range of optional equipment to your LCD TV using side connectors of the TV. • You can connect USB devices to your TV by using • For connecting a camcorder or camera , you should the USB input of the TV.
Connecting to a DVD Player Remote Control Handset via Component Sockets Inserting Batteries (YPbPr) or Scart Cable • Remove the battery cover located on the back of the handset by gently pulling backwards from the • Some DVD players are connected through indicated part.
Volume Setting Input Selection • Press “ V+” button to increase the volume. Press “V-” Once you have connected external systems to button to decrease the volume. A volume level scale your TV, you can switch to different input sources. (slider) will be displayed on the screen.
Blue button (Filter): Views fi ltering options. programme guide database in accordance with the genre. Info available in the programme guide will be searched and results matching your criteria will be listed. (Now) : Shows the current programme. First Time Installation IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time installation.
Installation Press “MENU” button on the remote control and select Installation by using “ ” or “ ” button. Press OK button and the following menu screen will be displayed. To select the “Yes” or “No” option, highlight the item by using “...
Digital Manual Search Press OK to cancel. Select Yes by pressing “ ” or “ ” button and press OK to delete all of the channels. Managing Stations: Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set In manual channel scan, the number of the multiplex active stations to be listed by using the Channel List...
stored channel on that number, a warning screen Managing Stations: Favourites will be displayed. Select Yes if you want to move the You can create a list of favourite programmes. channel and press OK. • Press “MENU” button to view main menu. Select •...
On-Screen Information You can press “INFO” button to display on-screen information. Details of the station and current programme will be displayed on the information banner. The information banner gives information on the channel selected and the programmes on it. The name of the channel is displayed, along with its When you select Videos from the main options, channel list number.
Viewing Photos via USB INFO: Displays help screen. When you select Photos from the main options, Viewing Music via USB available image fi les will be fi ltered and listed on this When you select Music from the main options, screen.
Subtitle Position: Sets subtitle position as up or Note: You can shift to screen up or down by pressing down. “ ” / “ ” buttons while picture zoom is selected as panaromic, 14:9 Zoom, Cinema or Subtitle. Subtitle Font Size: Sets subtitle font size (max. 54pt).
Cinema Setting Cool option gives white colours a slight blue stress. This zooms up the wide picture (16:9 aspect ratio) to For normal colours, select Normal option. the full screen. Setting Warm option gives white colours a slight red stress. Noise Reduction: If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount.
dot intensive presentations like spreadsheets or Press the “MENU” button to return to the previous paragraphs or text in smaller fonts. menu. Phase: Depending on the resolution and scan Note: Equalizer menu settings can be changed frequency that you input to the TV set, you may see manually only when the Equalizer Mode is in User.
Using a Conditional Access Confi guring Language Module Preferences IMPORTANT: Insert or remove the CI module only You can operate the TV’s language settings using when the TV is SWITCHED OFF. this menu. • In order to watch certain digital channels, a conditional Press “MENU”...
Language Settings Parental Settings Menu Operation • Select an item by using “ ” or “ ” button. • Use “ ” or “ ” button to set an item. • Press OK button to view more options. Menu Lock: Menu lock setting enables or disables the menu access.
Setting Programme Timers Confi guring Date/Time You can set programme timers for a particular Settings programme using this feature. Select Date/Time in the Settings menu to confi gure Press “ ” button to set timers on an event. Programme Date/Time settings. Press OK button. timer function buttons will be displayed on the screen.
• Select Sources in the Settings menu and press OK setting. In order for the proper operation, please button. ensure that the TV is set to standby mode. • Press“ ” or “ ” buttons to select a source. • Use “...
is present. Pressing “ ” or “ ” commands will request Other Features the next or previous page respec tively. Displaying TV Information: Programme Number, Tips Programme Name, Sound Indicator, time, teletext, channel type and resolution information is displayed Screen Care: Clean the screen with a slightly damp, on the screen when a new programme is entered or soft cloth.
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1360 x 768. The following table is an illustration of some of the Source Supported Signals Available typical video display modes.
Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i 480p 576i 576p 720p 1080i 1080p Appendix D: Supported File Formats for USB Mode Supported Players Player Stream...
Appendix E: Software Upgrade • Your TV is capable of fi nding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrade search via user interface •...
MOBIL TV INSTRUCTION MANUAL Switching the TV On Using 12 Volt Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to the battery of car, making sure to observe the correct polarity. Plug the other side of 12 volt cable to DC 12 socket at the back of the TV.
Features Contents Features ............... 73 General Properties General Properties..........73 • DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG Safety Information ..........74 / DivX playback. Notes on Discs ............. 74 • NTSC/PAL playback (according to disc content) On handling discs ..........
On cleaning Safety Information • Before playing, clean the disc with a cleaning cloth. CAUTION Wipe the disc from the center out. DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure.
DVD Control Panel Buttons A. Disc loader B. Play / Pause Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc. C.
General Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons on the Movie Picture Music Remote Control Playback Playback Playback...
Reverse stepping is not available. General Playback For your convenience: Basic Play If you attempt to enter a number greater than the total Press on the power button time of the current title, the time search box disappears Please insert a disc to the loader. and “...
Preferences SPDIF OUTPUT You can set Spdif Output as PCM or RAW. If you select DEFAULT PCM from SPDIF Output in DVD menu and play DVD If you choose RESET and press SELECT, the factory- with Dolby audio, you can get audio output with two presets are loaded.
Some functions (Angle, Zoom etc) do DVD has a structure consisting of two 0.6-mm thin discs, which are adhered to each other. Since the not work thinner the disc, the higher the density at which the • These functions are not available on the DVD. information can be recorded, a DVD disc has a greater •...
Need help?
Do you have a question about the ALED2205T and is the answer not in the manual?
Questions and answers