Modifying The Startup Configuration - Cisco Catalyst 3750-X Software Configuration Manual

Modifying the Startup Configuration

service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Stack1
!
enable secret 5 $1$ej9.$DMUvAUnZOAmvmgqBEzIxE0
!
.
<output truncated>
.
interface gigabitethernet6/0/1
no switchport
ip address 172.20.137.50 255.255.255.0
!
interface gigabitethernet6/0/2
mvr type source
<output truncated>
...!
interface VLAN1
ip address 172.20.137.50 255.255.255.0
no ip directed-broadcast
!
ip default-gateway 172.20.137.1 !
!
snmp-server community private RW
snmp-server community public RO
snmp-server community private@es0 RW
snmp-server community public@es0 RO
snmp-server chassis-id 0x12
!
end
To store the configuration or changes you have made to your startup configuration in flash memory, enter
this privileged EXEC command:
Switch# copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
This command saves the configuration settings that you made. If you fail to do this, your configuration
will be lost the next time you reload the system. To display information stored in the NVRAM section
of flash memory, use the show startup-config or more startup-config privileged EXEC command.
For more information about alternative locations from which to copy the configuration file, see
Appendix B, "Working with the Cisco IOS File System, Configuration Files, and Software Images."
Modifying the Startup Configuration
These sections describe how to modify the switch startup configuration:
•
•
•
•
•
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
3-16
Default Boot Configuration, page 3-17
Automatically Downloading a Configuration File, page 3-17
Booting Manually, page 3-18
Booting a Specific Software Image, page 3-19
Controlling Environment Variables, page 3-20
Chapter 3 Assigning the Switch IP Address and Default Gateway
OL-21521-01