4.02 Weld Parameter Description
Figure 5. - Pro-Lite 250S Front Panel with Parameter Description
Parameter
Description
This parameter operates in STICK weld mode and is used to improve
HOT START
the start characteristics for stick electrodes. e.g. low hydrogen
electrodes. It sets the peak start current on top of the (WELD) current.
Weld Current (Amperage)- sets the STICK and TIG WELD current.
A
ARC CONTROL - This parameter provides a suitable short circuit
current in STICK welding to improve electrode sticking and arc
stability.
LIFT TIG mode of operation. A remote control device is required for
use during LIFT TIG operation. See section 4.01, section 2 "Remote
Control Socket", for complete details of the remote device.
STICK Mode of operation
Table 3 – Weld Parameter Descriptions
25