Adjusting the system parameters
FACTORY PRESET
You can reset all of the parameters of this unit to the factory presets. This procedure
completely resets ALL the parameters in SET MENU.
'Rii
After perfonning the following procedure you must run
AUTO SETUP
again to match your surround
sound environment.
FACTORY PRESET
11
7
Press STANDBY/ON on the remote control to
set this unit to the standby mode.
STANDBY/ON
~
The new setting will be activated when you tum on the
power of this unit next time.
~\.-:.
When the demo mode is turned on, restart the unit, then press
ENTER while playing back sources to test the sound beam.
The sound beam being output shuttles between left and right.
Press ENTER again to stop shuttling.
RESET, CANCEL
•
93
En