Table of Contents
Advertisement
Using this manual
• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the
supplied owner's manual for each component.
• Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
• :'.<
indicates a tip for your operation.
• This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
1
Install this unit in your listening room.
See "Installation" on page 13.
2
Connect this unit to your TV and other external components.
See "Connections" on page 16.
3
Prepare the remote control and turn on the power of this unit.
See "Getting started" on page 24.
4
Run AUTO SETUP.
See "AUTO SETIJP (IntelliBeam)" on page 29.
5
Play back a source.
See "Playback" on page 39.
6
Change the beam modes and/or CINEMA DSP settings.
See "Enjoying surround sound" on page 56.
If you want to make additional settings
and adjustments
7
Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
See "MANUAL SETUP" on page 74 and "Remote control features" on page 94.
5
En
•
Advertisement
Table of Contents
