Table of Contents
Advertisement
•
INPUT TRIM (Input trim)
Use to adjust the input level of the input source.
C)INPUT TRIM
1/2
.. TU/STB
~~I~LOG···
-3. 0dB
DIGIT~L··
-3. 0dB
OlJD
DIGIT~L
.. -3.0dB
• Select TV/STB ANALOG to adjust the level of audio
and video signals input at the TV/STB AUDIO INPUT
jacks of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select TV/STB DIGITAL to adjust the level of audio
and video signals input at the TV/STB OPTICAL
DIGITAL INPUT jack of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select DVD DIGITAL to adjust the level of audio and
video signals input at the DVD COAXIAL DIGITAL
INPUT jack of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
C) HlPUT TRUll
..
j:lUXl
~~l~lOG·
•• -3. 0dB
DIGIT~L·
• -3. 0dB
~UX2
DIGIT~l··-3.0dB
AUX3
~NALOG···-3.0dB
DOCK
A~IALOG···
-3. 0dB
["']/[T]:Up/Down [otI]/[I'-]:Sel
[HilER]: Return
• Select AUXI ANALOG to adjust the level of audio and
video signals input at the AUXI AUDIO INPUT jacks
of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select AUXI DIGITAL to adjust the level of audio and
video signals input at the AUX I OPTICAL DIGITAL
INPUT jack of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select AUX2 DIGITAL to adjust the level of audio and
video signals input at the AUX 2 COAXIAL DIGITAL
INPUT jack of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select AUX3 ANALOG to adjust the level of audio
signals input at the AUX 3 input jack on the front panel.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select DOCK ANALOG to adjust the level of audio
signals input at the DOCK terminal of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
MANUAL SETUP
•
INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD
and the front panel display. Press an input selector button
(e.g., DVD) to select the component you want to change
the name for and perform the following procedure.
DUD -)
DVD
[otl ]/[1'-]:
Posi tion
["']/[T]:Character
[ENTER]: Return
1
Press
<II
~ to place the _ (underscore) under
the space or the character you want to edit.
The _ (underscore) flashes.
2
Press
L:::>.
I
V'
to select the desired character.
• You can use up to 8 characters for each input.
• Press
V'
to change the character in the following
order or press
L:::>.
to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+, etc.
3
Repeat steps 1 to 2 to rename each input.
4
Press ENTER to exit.
The new names are registered, and the display returns
to the previous screen.
83
En
•
Advertisement
Table of Contents
