Recommended Tools - Andrew ES45T Installation, Operation And Maintenance Manual

Recommended
Tools
Note: Failure to follow an installation procedure could result in damage to equipment or
personal injury.
Additional warnings will be displayed throughout this manual for your awareness. These
warnings can be identified in warning boxes as shown in the following sample.
Andrew disclaims any liability or responsibility for the results of improper or unsafe
installation, operation or maintenance practices.
Andrew supplies all appropriate hardware/parts required for the installation of your 4.5-
Meter Earth Station Antenna. All tools necessary for the installation process should be
provided by the installation crew. Andrew recommends that the following tools be used
for a proper installation of the 4.5-Meter Earth Station Antenna.
Tool
Open End Wrench
Drive Sockets
Spud Wrench
Breaker Bar
Screw Driver
Allen Wrench
Tape Measure
Felt-tip Marker
Hammer
Rubber Mallet
Pry Bar
Tin Snips
Crane
Rope/Cord (2000 lb breaking strength)
Shackles
Ladder
Nylon Web Sling
Table 1. Recommended Tools
Size
1/4"
3/8"
1/2"
9/16"
5/8"
3/4"
7/8"
1-1/4"
7/16"
9/16"
3/4"
7/8"
1-1/16"
1-1/4"
1-1/16"
1/2"
Standard
Phillips
1/2"
Standard
Standard
Standard
Standard
Standard
Standard
1 Ton Minimum Capacity
50 ft
5/8"
10 Foot Extension
3" x 3'
7
Qty.
2
2
2
2
2
2
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
Getting Started