JVC MX-J150R Service Manual page 8

Removing the front panel assembly
1.
2.
3.
F and the two screws G attaching
the front panel assembly on both sides of the body.
Remove the screw V attaching the earth terminal
extending from the front compartment.
4. Remove the screw H attaching the front panel
assembly on the bottom of the body.
5. Release the two joints d on both sides and two joints
e on the bottom of the body using a screwdriver. At
the same time, disconnect the front compartment
from connector CCW1 and CCW2 of the main board.
(See Fig.11 to 13)
Front panel assembly
Joint d
G
earth wire
Main board
Joint e
Main board
CCW1
DW2
DW1
V
Fig.11
Front panel assembly
F
Headphone board
HCW1
Joint d
G
Fig.12
H
Joint e
Fig.13
CCW2