Turning The Power On - Canon FAX-L2000 Reference Manual

Turning the Power ON

1
Connect the power cord to the power socket on the back of the
main unit.
2
Connect the other end of the power cord to the power source.
After you connect the power cord to the power source, the LCD display turns
ON.
CAUTION
• The machine must be connected to a properly grounded, three-prong 220-240 V
AC outlet.
NOTE
• There is no power switch on the main unit.
• The message below appears while it takes a few seconds for the machine to warm up.
• When you connect the power cord to an AC outlet for the first time after purchase,
<DISPLAY LANGUAGE> will appear in the LCD display after <PLEASE WAIT>. In this
case, set the language for the LCD display, and the country*. (See "Setting the Display
Language and Country", on p. 1-53.)
* The country selection feature is available for certain countries only.
• The machine has warmed up and is ready to use when you see the date and time
displayed. Now the machine is in the Standby mode.
PLEASE WAIT
FAX 31/12 2002 03:40
AUTO
Assembling the Machine
1
1-51