Light Brightness Selection; Light Brightness Regulation - Honda CB1000R Owner's Manual

2

Light brightness selection

It is possible to select instrument light
brightness from 3 patterns.

Light brightness regulation:

1. Turn the ignition switch ON.
2. Press and hold both the SET(1) and
RESET(2) button more than two seconds.
Press the RESET button repeatedly to
select the light brightness as you like.
a - Maximum light select value 3;
b - Middle light select value 2;
c - Minimum light select value 1.
To end the setting, press and hold the SET
and RESET button more than two seconds;
or press once SET(1) button to adjust the
clock time (page 31).
30
(1) (2)
(a)
(b)
(c)
(1) SET button
(2) RESET button