Honda CB1000R Owner's Manual page 134

7
3. Remove the four rear wheels nuts(6).
4. Remove the rear wheel (7) slowly.
Installation Notes:
• To install the rear wheel, reverse the
removal procedure.
Tighten the rear wheel nuts to the specified
torque:
Torque rear wheel nuts:
108 N•m (11,0 kgf•m, 80 lbf•ft)
Tighten the bolts (2)(3)(5) of exhaust muffler
to the specified torque:
Torque bolts exhaust muffler:
22 N•m (2,25 kgf•m, 16 lbf•ft)
After installing the wheel, apply the brake
several times and then check if the wheel
rotates freely. Recheck the wheel if the brake
drags or if the wheel does not rotate freely.
124
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
(7)
(6) Rear wheel nuts
(7) Rear wheel
(6)