Honda CB1000R Owner's Manual page 45

Rebound Damping:
To reduce (SOFT):
Turn the adjuster counterclockwise toward
SOFT for a light load and smooth road
condition.
To increase (HARD):
Turn the adjuster clockwise toward HARD for
a firmer ride and rough road condition.
To adjust the adjuster to the standard
position, proceed as follows:
1. Turn the damping adjuster (1) clockwise
until it will no longer turn (lightly seats). This
is the full hard setting.
2. The adjuster is set in the standard position
when the adjuster
counterclockwise approximately 2 turns so
that its punch mark (2) aligns with the
reference punch mark (3).
3. Make sure that both fork legs are adjusted
to the same position.
is turned
(1) Damping adjuster
(2) Punch mark
(3) Reference punch mark
(1)
(1)
(2)
3
(3)
35