Honda CB1000R Owner's Manual page 132

7
8. If the clearances (8) between each surface
of the brake disc (9) and the brake bracket
(10) (not the brake pads) are symmetrical,
follow next step.
If the clearances are not symmetrical,
loosen the left axle pinch bolts and pull the
left fork outward or push inward to adjust
the clearance. Then follow the next step.
(10)
(8) Clearances
(9) Brake disc
(10) Brake bracket
122
9. Tighten the axle pinch bolts on the right fork
(8)
(9)
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
leg to specified torque:
22 N•m (2,25 kgf•m,16 lbf•ft)
• Visually check that the clearances
between each surface of the brake disc
and the brake bracket (not the brake
pads) are symmetrical.
• Check for free wheel rotation after the brake
lever is released. Recheck the wheel if the
brake drags or if the wheel does not rotate
freely.
• Verify proper brake operation before
riding.