Honda CB1000R Owner's Manual page 72

4
If the system repeatedly does not recognize
the coding of your key, contact your Honda
dealer.
• The system may not recognize the key's
coding if any other immobilizer key is near
the ignition switch. To make sure the
system recognizes the key code, keep
each immobilizer key on a separate ring.
• Do not attempt to alter the immobilizer
system (HISS) or add other devices to it.
Electrical problems could result, making it
impossible to start your motorcycle.
• If all keys are lost, the PGM-FI unit/ignition
control module must be replaced.
62
EC Directives
This immobilizer system complies with the
R & TTE (Radio equipment and telecommu-
nications terminal equipment and the mutual
recognition of their conformity) Directive.
The declaration of conformity to R & TTE
Directive is provided to the owner at the time
of purchase. The declaration of conformity
should be kept at a safe place. When the
declaration of conformity is lost or is not
provided, contact your Honda dealer.
< South Africa only >