About This Document; Getting Support - 3Dlabs Wildcat 4210 User Manual

About This Document

The 3Dlabs Wildcat 4210 Graphics User's Guide contains information on the setup and use of the
Wildcat 4210 and Wildcat 4210 VIO video cards, as well as troubleshooting information, connections,
and specifications.
NOTE References to Wildcat 4210 in this document cover both Wildcat 4210 and Wildcat 4210
VIO unless otherwise noted.
If you purchased this card as part of a system, the card was factory installed and configured in your
system prior to shipment. This document provides instructions for setting your display parameters and
installing the video drivers and hardware in case you bought the card as part of an upgrade or add-on
purchase.
The document is organized as follows:
♦
Chapter 1, "Introduction," describes the Wildcat 4210 video card, its features, and its external
ports.
♦
Chapter 2, "Setup," provides step-by-step instructions for installing Wildcat 4210 hardware and
driver software, and for connecting monitors and a stereo display device.
♦
Chapter 3, "Using the Video Card," provides instructions for configuring the video display and
using Wildcat 4210 video card's features.
♦
Chapter 4, "Troubleshooting," describes ways to solve common problems and how to get help.
♦
Chapter 5, "Technical Information," provides general, functional, and performance specifications
for the Wildcat 4210 video card, and describes its ports and connectors.

Getting Support

When you need software support or hardware maintenance, contact your system vendor.
For the latest Wildcat news and product information, visit http://www.3dlabs.com on the World Wide
Web.
v