Table of Contents
Advertisement
Ports and Connectors
The Wildcat 4210 is an AGP Pro 110 card designed for computers that have an AGP Pro 110 slot. The
card plugs into the AGP Pro 110 slot and an adjacent PCI slot.
NOTE
A Wildcat 4210 cannot plug into a standard AGP slot.
Figure 12. Expansion Slot Connectors (Shown On Wildcat 4210)
The card has several external ports for external devices and computer connections. The following
sections describe the ports in detail. See Chapter 1, "Introduction," for the location of the ports on the
Wildcat 4210 and Wildcat 4210 VIO cards.
DVI-I Out Ports (Wildcat 4210 Only)
The primary and secondary digital video output ports are DVI-I receptacles with 29 signal contacts as
specified by the Digital Visual Interface specification (Revision 1.0). These ports support pixel rates
up to 112 MHz using the SII150 A PanelLink device from Silicon Image. The ports are fully
compliant with the DVI specification, and support digital and analog displays.
Analog Video Out Ports (Wildcat 4210 VIO Only)
The analog video out ports are female, 15-pin, D-sub connectors. These ports provide connection to
two analog CRT displays.
27
Advertisement
Table of Contents
