EverFocus EDSR400H Instruction Manual page 39

(4) LOAD DEFAULT :
YES/NO :
YES :
(5) PASSWORD INABLE:
Password is used to prevent unauthorized personnel to change any setup of the device.
Set " NO" to release password function, set " YES" to enable password function.
(6) PASSWORD:
With up to 6 characters is supported in the digital video recorder.
The available alphanumeric characters are:
0,1,2,3,4,5,6,7,8,9,
A,B,C,......X,Y,Z
/ ( ) . - * & @ : "
The factory default setting for password is disable.
Note: Security Lock Setting:
When the image recording, press " STOP" to enter the password.
The screen will show as below:
INPUT PASSWORD
123456 DONE
PRESS MENU TO EXIT
Load the Load System.
The double check dialog will appear on the screen.
: or to move the cursor to the left or right.
Press
: or to change the value.
Press
32