Sony HCD-VZ50MD Service Manual page 10

Iop DATA RECORDING AND DISPLAY WHEN OPTICAL PICK-UP AND NON-VOLATILE MEMORY (IC195 OF
BD (MD) BOARD) ARE REPLACED
The Iop value labeled on the optical pick-up can be recorded in the non-volatile memory. By recording the value, it will eliminate the need to
look at the value on the label of the optical pick-up. When replacing the optical pick-up or non-volatile memory (IC195 of BD (MD) board),
record the Iop value on the optical pick-up according to the following procedure.
Record Precedure:
1. In the power ON state, set the function to MD, and while pressing the DISPLAY and x buttons together, press V-GROOVE .
2. Move the Multi stick to display "[Service]", and press the PUSH ENTER button.
3. Move the Multi stick to display "Iop Write" (C05), and press the PUSH ENTER button.
4. The display becomes "Ref=@@@.@" (@ is an arbitrary number) and the numbers which can be changed will blink.
5. Input the Iop value written on the optical pick-up.
To select the number : Move the Multi stick.
To select the digit : Press the MD REC MODE button while REC IT is lit.
6. When the PUSH ENTER button is pressed, the display becomes "Measu=@@@.@" (@ is an arbitrary number).
7. As the adjustment results are recorded for the 6 value. Leave it as it is and press the PUSH ENTER button.
8. "Complete!" will be displayed momentarily. The value will be recorded in the non-volatile memory and the display will become "Iop
Write" (C05).
Display Precedure:
1. In the power ON state, set the function to MD, and while pressing the DISPLAY and x buttons together, press V-GROOVE .
2. Move the Multi stick to display "[Service]", and press the PUSH ENTER button.
3. Move the Multi stick to display "Iop Read" (C26).
4. "@@.@/##.#" is displayed and the recorded contents are displayed.
@@.@ : indicates the Iop value labeled on the optical pick-up.
##.# : indicates the Iop value after adjustment
5. To end, press the NAME EDIT/CHARACTER button while REC IT is lit, or press the MD REC MODE button to display "Iop Read"
(C26).
10