VTech VM310 User Manual

Part checklist
User's manual
VM310/VM310-13
Accessory baby unit
for use with VTech model
VM311/VM311-13/VM311-2/
VM311-23
Connect the baby unit
• Use only the baby unit power adapter
supplied with this product.
• The baby unit power adapter is intended
to be correctly oriented in a vertical or
floor mount position. The prong are not
designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or
cabinet outlet.
Congratulations • Make sure the baby unit and the power
adapter cord are out of reach of children.
on purchasing your new VTech product.
Before using this product, please read
Important safety instructions.
This manual has instructions on how to set
up and pair your new baby unit. For complete
instructions on using the baby unit, see the Baby unit power adapter
user's manual that came with your video and
audio monitor.
For support, shopping, and everything new at
VTech, visit our website at
www.vtechphones.com.
Self-adhesive
Register online to get an additional
strap
3-month warranty!
Visit www.vtechphones.com.
Registration
Register your product online for
enhanced warranty support.
Product news
Learn about the latest VTech
products.
Overview
Camera
1
2 Infrared LEDs
Backup light for night vision.
3 POWER on/off indicator
• On when the baby unit is powered on
and currently linked to parent unit.
• Flashes when the baby unit is not
linked to a parent unit; or
the pairing process is in progress; or
the parent unit is not viewing this baby
unit.
4 Power jack
Power outlet not
5 Control key panel
controlled by a wall switch
/VOL +
Press to increase the listening volume.
/VOL-
Press to decrease the listening volume.
PAIR
Press and hold to pair to the parent unit.
(On/Off)
Press and hold to turn on or off.
6 Microphone
7 Stand
Tilt to adjust the camera angle.
Rim
8
Baby unit
9 Base
Positioning the baby monitor
Before use
Place the parent unit within the operating range
of the baby unit. We recommend the parent
Pair and replace extra new baby unit
unit is at least 3 feet away from the baby unit
Each newly purchased baby units (VM310/
to avoid audio feedback. If you still experience
VM310-13) must be paired to your video and
audio feedback, move the parent unit and the
audio monitor system (VM311/VM311-13/
baby unit farther apart.
VM311-2/VM311-23).
For better image quality, do not place the
• You can pair a maximum of four baby baby unit too far away from your baby.
units to your parent unit. Each new baby
For desktop usage and/or wall mounting the
unit must be paired to the parent unit
baby unit, you can refer to Installation guide.
before use.
• Make sure you power on the parent unit
Operating range
before pairing.
The operating range of the baby monitor is up
To pair and replace a baby unit:
to 1,000 feet outdoors or 150 feet indoors. The
1. Press MENU/ when the parent unit is
SELECT
actual operating range may vary depending
not in use.
on the environmental conditions and other
2. Press or to choose .
interferences such as walls, doors and other
3. Press or to choose a desired baby unit
obstructions.
slot, then press /SELECT. The screen
MENU
displays .
General product care
If you choose an occupied baby unit slot,
the new baby unit will replace the existing
baby unit. To keep this product working well and looking good,
follow these guidelines:
4. Press and hold on the new baby unit
until the POWER light flashes. • Avoid putting it near heating appliances and
devices that generate electrical noise (for example,
Then immediately press and hold PAIR
motors or fluorescent lamps).
until the POWER light turns on.
• DO NOT expose it to direct sunlight or moisture.
When pairing is successful, the screen displays
• Avoid dropping the product or treating it roughly.
, and then the image from the newly paired
baby unit.
• Clean with a soft cloth.
• DO NOT immerse the baby unit in water and do
• If pairing fails, the screen displays . Try
not clean them under the tap.
the pairing process again.
• DO NOT use cleaning spray or liquid cleaners.
• Only one baby unit can be paired at a time.
• Make sure the baby unit is dry before you
To unpair a baby unit:
connect them to the mains again.
Make sure you power on the baby unit and
the parent unit before unpairing the baby unit.
Important safety
1. Press MENU/ when the parent unit
SELECT
is not in use.
instructions
2. Press or to scroll to .
3. Press or to select the desired baby unit
When using your equipment, basic safety
(1, 2, 3 or 4).
precautions should always be followed to reduce the
risk of fire, electric shock and injury, including the
4. Press and hold TALK until and
following:
display.
1. Follow all warnings and instructions marked on
5. Press or to select to cancel, or to
the product.
confirm the unpair process.
2. Adult setup is required.
6. Press /SELECT to confirm your selection.
MENU
3. This product is intended as an aid. It is not
When unpairing is successful, the POWER
a substitute for responsible and proper adult
light on the selected baby unit flashes. The
supervision and should not be used as such.
parent unit displays for a while, and then the
4. This product is not intended for use as a medical
image from the baby unit previously viewing.
monitor.
5. Do not use this product near water. For example, do 20. Children should be supervised to ensure that they
not use it next to a bath tub, wash bowl, kitchen sink, do not play with the product.
laundry tub or swimming pool, or in a wet basement
21. The product is not intended for use by persons
or shower.
(including children) with reduced physical,
6. Use only the adapter included with this product. sensory or mental capabilities, or lack of
Incorrect adapter polarity or voltage can seriously experience and knowledge, unless they have
damage the product. been given supervision or instruction concerning
Baby unit power adapter: Input 100-240V AC use of the appliance by a person responsible for
150mA 50/60Hz; Output: 6V DC 600mA. their safety.
7. The power adapter are intended to be correctly
SAVE THESE INSTRUCTIONS
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place
Cautions
if it is plugged into a ceiling, under-the-table or
1. Use and store the product at a temperature
cabinet outlet.
o
between 32 F and 104
8. Unplug this product from the wall outlet before
2. Do not expose the product to extreme cold, heat
cleaning. Do not use liquid or aerosol cleaners.
or direct sunlight. Do not put the product close to
Use a damp cloth for cleaning.
a heating source.
9. Do not cut off the power adapter to replace it with
3. Make sure the baby unit(s) and the adapter
other plug, as this causes a hazardous situation.
cord(s) are always out of reach of the baby, at
10. Do not allow anything to rest on the power cords.
least 3 feet away from the baby or crib, to avoid a
Do not install this product where the cords may be
possible strangulation hazard.
walked on or crimped.
4. Never place the baby unit(s) inside the baby's
11. This product should be operated only from the
crib or playpen. Never cover the baby unit(s) with
type of power source indicated on the marking
anything such as a towel or a blanket.
label. If you are not sure of the type of power
supply in your home, consult your dealer or local 5. Other electronic products may cause interference
power company. with your baby monitor. Try installing your baby
monitor as far away from these electronic devices
12. Do not overload wall outlets or use an extension
as possible: wireless routers, radios, cellular
cord.
telephones, intercoms, room monitors, televisions,
13. Do not place this product on an unstable table,
personal computers, kitchen appliances and
shelf, stand or other unstable surfaces.
cordless telephones.
14. This product should not be placed in any area
Precautions for users of implanted cardiac
where proper ventilation is not provided. Slots and
pacemakers
openings in the back or bottom of this product
are provided for ventilation. To protect them from
Cardiac pacemakers (applies only to digital cordless
overheating, these openings must not be blocked
devices):
by placing the product on a soft surface such as
Wireless Technology Research, LLC (WTR), an
a bed, sofa or rug. This product should never be
independent research entity, led a multidisciplinary
placed near or over a radiator or heat register.
evaluation of the interference between portable
15. Never push objects of any kind into this product
wireless devices and implanted cardiac pacemakers.
through the slots because they may touch
Supported by the U.S. Food and Drug Administration,
dangerous voltage points or create a short circuit.
WTR recommends to physicians that:
Never spill liquid of any kind on the product.
Pacemaker patients
16. To reduce the risk of electric shock, do not
disassemble this product, but take it to an • Should keep wireless devices at least six inches
authorized service facility. Opening or removing from the pacemaker.
parts of the product other than specified access
• Should NOT place wireless devices directly over
doors may expose you to dangerous voltages
the pacemaker, such as in a breast pocket, when
or other risks. Incorrect reassembling can cause
it is turned ON.
electric shock when the product is subsequently
WTR's evaluation did not identify any risk to
used.
bystanders with pacemakers from other persons
17. You should test the sound reception every
using wireless devices.
time you turn on the units or move one of the
components.
Electromagnetic fields (EMF)
18. Periodically examine all components for damage.
This VTech product complies with all standards
19. Be aware of possible loss of privacy while using regarding electromagnetic fields (EMF). If handled
properly and according to the
public airwaves. Conversations may be picked
user's manual, the product is safe to be used based
up by other nursery monitors, cordless phones,
scanners, etc. on scientific evidence available today.
o
F.
instructions in this