Napoleon HD35NT, HD40NT Installation And Operating Instructions Manual page 32

32
NON-COMBUSTIBLE FINISHING MATERIAL
NOTE: For detailed installation instructions on the 4-sided frame, optional faceplate or bevelled trims
refer to the installation instructions provided with the kit.
A joint compound that is resilient to heat and cracking should be used when taping and mudding
seams.
NON- COMBUSTIBLE MATERIAL
FINISHING DIMENSIONS
Ref HD35
A
33 3/4"
B
Non-combustible Material Defi nitions
Material which will not ignite and burn. Materials consisting entirely of steel, iron, brick, tile, concrete, slate,
glass or plasters, or any combination thereof are suitable.
Materials that are reported as passing ASTM E 136, Standard Test Method for Behaviour of Materials in a
Vertical Tube Furnace at 750°C and UL763 shall be considered non-combustible materials.
W415-0820 / D / 02.03.12
COMBUSTIBLE
MATERIAL
A
1 1/4"
MIN.
HD40
33" 38"
33 3/4"
COMBUSTIBLE FINISHING MATERIAL
COMBUSTIBLE
MATERIAL
NON-
COMBUSTIBLE
MATERIAL SUCH
AS TILE, MARBLE
GRANITE, ETC.
7 3/8"
MIN.
B
NON-COMBUSTIBLE REQUIRED
IF USING OPTIONAL FACE-
PLATE OR BEVELLED TRIMS.
Ref
HD46
44"
C
33 3/4"
D
NON-COMBUSTIBLE
REQUIRED IF USING
OPTIONAL 4-SIDED
FRAME KIT
12"
2"
C
COMBUSTIBLE MATERIAL
FINISHING DIMENSIONS
HD35 HD40
35 1/2" 40 1/4"
41" 41"
6 1/2"
MIN
D
HD46
46 1/4"
41"