Napoleon HD35NT, HD40NT Installation And Operating Instructions Manual page 29

70"*
12"
FRAMING DIMENSIONS
Ref HD35 HD40
35 3/4" 40 3/4"
A
* Allow for fi nished fl oor and hearth thickness when setting these dimensions.
** When constructing the enclosure allow for fi nishing material thickness to maintain clearances.
WARNING
!
DO NOT BUILD INTO THIS AREA - IT MUST BE LEFT
CLEAR TO PROVIDE ADEQUATE CLEARANCE FOR
THE VENT IN THIS 14" WIDE AREA CENTERED ALONG
THE FRONT OF THE APPLIANCE. NO COMBUSTIBLES
ARE ALLOWED.
3 1/2" MAX
14" MIN
1 1/2" MAX
20 1/4"**
41 1/4"*
A
HD46
46 3/4"
NOTE: Three braces are required (as
nailers) if using optional 4-sided
frame kit.
29
NOTE: If using
optional faceplate
or bevelled trims,
nailers are
required to back
up the non-
combustible strip.
W415-0820 / D / 02.03.12