Select Cycle; Pull Control Dial Out To Start - Maytag SAV-1 User Manual

Step 4
Select Wash/Spin Speed
Your washer has selectable wash and spin speed com-
binations.
WASH/SPIN SPEEDS
Sturdy fabrics needing maxi-
Regular
mum water extraction.
Fast/Fast
Sturdy fabrics needing a slow-
Perm. Press
er spin speed because of wrin-
Fast/Slow
kling.
Delicate
Gentle
slower spin speed because
Slow/Slow
of clothing construction.
Step 5

Select Cycle

To select a cycle, push the control dial IN and turn it to
the right (clockwise) until the pointer is at the number
of minutes desired for the wash load.
Regular Cycle
For regular fabrics, select the cycle time and turn the
Wash/Spin Speed dial to Regular/Fast/Fast. For max-
imum cleaning set the dial at 18.
Permanent Press Cycle
This cycle provides up to 12 minutes of agitation.
Depending on the
Regular/Fast/Fast or Perm. Press/Fast/Slow wash/
spin speed.
Gentle Cycle
The Gentle Cycle provides approximately 10 minutes
of agitation and soaking to help remove stains.
Step 6

Pull Control Dial Out to Start

You may stop the washer at any time by simply push-
ing the control dial IN. Therefore it is possible to obtain
a non-agitated soak or to shorten, skip or repeat any
part of a cycle. The control dial must be pushed IN (off
position) when you change the setting.
WASH/SPIN SPEEDS
fabrics needing
load, select either the
Soak Only
There will be a brief period of agitation followed by a
soak. Soaking should be no longer than 30 minutes. The
control dial must be advanced manually to a spin or a
wash setting.
See Laundering Tips for proper washing procedures,
stain removal, and special laundering situations.
4