Installing Four Crossfirex Tm -Ready Graphics Cards - ASROCK Fatal1ty X99 Professional Series User Manual

Fatal1ty X99 Professional Series
TM
2.11.3 Installing Four CrossFireX -Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot,
another graphics card into PCIE2 slot, the
third graphics card into PCIE4 slot and the
last graphics card into PCIE5 slot. Make
sure that the cards are properly seated on
the slots.
Step 2
TM
Use one CrossFire Bridge to connect
the graphics cards on PCIE1 and PCIE2
CrossFire Bridge
TM
slots, another CrossFire Bridge to
connect the graphics cards on PCIE2 and
TM
PCIE4 slots, and use the third CrossFire
Bridge to connect the graphics cards on
TM
PCIE4 and PCIE5 slots. (The CrossFire
Bridge is provided with the graphics
card you purchase, not bundled with this
motherboard. Please refer to your graphics
card vendor for details.)
Step 3
Connect a VGA cable or a DVI cable to the
monitor connector or the DVI connec-
tor of the graphics card that is inserted to
PCIE1 slot.
43