Installing Four Crossfirex Tm -Ready Graphics Cards - ASROCK X99 WS-E/10G User Manual

X99 WS-E/10G / X99 WS-E
TM
2.10.3 Installing Four CrossFireX -Ready Graphics Cards
Step 1
Insert one graphics card into PCIE7 slot,
another graphics card into PCIE5 slot, the
third graphics card into PCIE3 slot and the
last graphics card into PCIE1 slot. Make
sure that the cards are properly seated on
the slots.
Step 2
Use one CrossFire Bridge to connect the
graphics cards on PCIE7 and PCIE5 slots,
another CrossFire Bridge to connect
the graphics cards on PCIE5 and PCIE3
slots, and use the third CrossFire Bridge
to connect the Radeon graphics cards on
PCIE3 and PCIE1 slots. (he CrossFire
Bridge is provided with the graphics
card you purchase, not bundled with this
motherboard. Please refer to your graphics
CrossFire Bridge
card vendor for details.)
Step 3
Connect a VGA cable or a DVI cable to the
monitor connector or the DVI connector of
the graphics card that is inserted to PCIE7
slot.
51