Storage and Disposal
Storage
After switching the unit off, leave for one day until
any water inside has had time to settle. Then carry
out the following steps.
1
Perform internal drying
Performing internal drying to prevent mildew
growth is recommended.
Wrap the
2
power cord
Remove the drainage water.
3
P20
4
Clean the silver ion fi lter
Remove any dust from the white net surface
with the nozzle of a vacuum cleaner.
Clean the air intake and
5
sensor
P22
Remove any dust from the white net surface
with the nozzle of a vacuum cleaner.
6
Store the unit.
When you are sure that all parts of the unit
are dry, cover it with a cloth to keep it from
dust.
Store the unit in an upright position in a
place not exposed to direct sunlight.
When disposing the unit
Dispose according to the garbage regulations in
your district.
Silver ion fi lter Material:
PET and PS
P19
Unit
Do not disassemble. Dispose according to the
waste regulations in your area.
P22
25