Mitsubishi Electric FR-A7AD Instruction Manual page 25

HIGH-SPEED ANALOG OUTPUT
Types of
Setting
Monitor
211 Terminal 1
*9
230 Output frequency
*7, *8, *9
231 Motor speed
*7, *8, *9
232 Speed command
*7, *8, *9
235 Torque command
*7, *8, *9
236 Motor torque
*7, *8, *9, *10
Excitation current
237
*7, *8, *9
command
Torque current
238
*7, *8, *9
command
255 No monitor
*6 Differs according to capacities. (55K or lower/75K or higher)
The inverter model numbers of 55K and 75K differ according to -NA and -EC versions. (Refer to page 1.)
*7 The output is "0" under V/F control and Advanced magnetic flux vector control.
*8 High-speed monitor.
*9 Monitor with a plus/minus sign.
*10 The output is "0" under DC injection brake and magnetic flux decay output shutoff.
20
Increments Full Scale Value
0.1% 100%
0.01Hz Pr.55
Pr.55 (converted to
1r/min
r/min)
1r/min Pr.55
0.1% Pr.866
0.1% Pr.866
0.1% 300%
0.1% Pr.866
— —
Description
Displays the input voltage to the terminal 1
(displays 100% for 10V (fixed))
Displays the inverter output frequency (0V to
+10V during forward rotation, 0V to -10V
during reverse rotation)
Displays the motor speed (0V to +10V during
forward rotation, 0V to -10V during reverse
rotation)
Displays the speed command (0V to +10V
during forward rotation, 0V to -10V during
reverse rotation)
Displays the torque command.
Displays the motor torque in percentage on the
assumption that the rated motor torque is
100%.
Displays the excitation current command.
Displays the commanded current for the
torque.
—