Table of Contents
Advertisement
HIGH-SPEED ANALOG OUTPUT
Setting
Types of Monitor
24
Motor load factor
32
Torque command
*3
33
Torque current command
*3
34
Motor output
*4
Torque monitor (power driving/
36
*4
regeneration switchover)
46
Motor temperature
*5
50
Energy saving effect
52
PID set point
53
PID measured value
*1
Outputs 0V to +10V during forward rotation, and 0V to -10V during reverse rotation.
*2
Differs according to capacities. (55K or lower/75K or higher)
The inverter model numbers of 55K and 75K differ according to -NA and -EC versions. (Refer to page 1.)
*3
Positive voltage is output during forward driving/reverse regeneration, and negative voltage is output during
reverse driving/forward regeneration.
*4
Positive voltage is output during power driving, and negative voltage is output during regeneration.
*5
Monitoring is available when FR-A7AZ is mounted.
18
Increments
0.1%
200%
0.1%
Pr.866
0.1%
Pr.866
0.01kW/0.1kW
Rated motor current
*2
—
Pr.866
1°C
Pr.751
Changeable by
parameter
Inverter capacity
setting.
0.1%
100%
0.1%
100%
Full Scale Value
Advertisement
Table of Contents
