Maintenance; Authorized Service - Jacuzzi Summer Rain 2 Wall and 3 Wall Installation And Operating Instructions Manual

To remove any lime scale from the shower head and body sprays , rub with your finger the outer ring of nozzles on
the shower head and all nozzles on the body spray.
To clean the foot temperature tester, unscrew the nozzle and back flush the wire mesh filter. Do not use metal tools
(such as scissors or screwdrivers, etc.) to clean the body sprays, shower head or foot temperature tester.
To cleanthe base, simply use a mild, nonabrasive liquid detergent solution. You can protect and restore the gloss to
a dulled acrylic surface by applying Meguiar's #10 Mirror Glaze, a product specifically designed for use on acrylic
finishes. If Meguiar's is not available, an acrylic polish of equal quality or automotive paste wax is acceptable.
The glass can be cleaned with any glass-cleaning product available on the market.
Do not use abrasives, alcohol, acetone, ammonia or other solvents on any tower component.
The thermostatic valve has 2 screen filters that should be cleaned periodically. To remove the filters turn off hot and
cold supplies. Remove tower cover. Disconnect the supply hoses from the valve and remove filter from the hose.
Clean any debris. Reinstallation is the reverse of removal. Turn on hot and cold supply and check for leaks.
If you need a referral for a service company near you, or need assistance with operation or maintenance related
questions, please call our Service Support Department at 1-800-288-4002. For service agent listing, visit our web site
at http://www.jacuzzi.com/. To find the service agent listings, click on "For The Trade". Then click on Electrical/
Mechanical Service Agents. Depending on the problem, click on "Electrical/Mechanical Repairs" or "Finish, Surface
or Shell-Related Problems".
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of
this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product.
Jacuzzi Whirlpool Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.
Printed on Recycled Paper
2 & 3 WALL MAINTENANCE

Authorized Service

USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.
Jacuzzi Whirlpool Bath
P.O. Box 702168, Dallas, TX 75370-2168
Service Support: Call (800) 288-4002
© 2002 Jacuzzi Whirlpool Bath U223000 8/13/04
24
.
Printed in U.S.A