Jacuzzi Summer Rain 2 Wall and 3 Wall Installation And Operating Instructions Manual page 11

2 WALL: TOWER, FIXED WALL AND CURVED GLASS INSTALLATION
STEP 4
Slide the glass panel into the wall post. Make sure that
the corner notch is positioned toward the base of the
tower.
STEP 5
Place the tower onto base. Ensure the curved glass
locates into the glazing channel. Install bolt but do not
tighten.
STEP 6
Insert tower support rail into glass panel rail but do not
tighten at this time.
TOWER SUPPORT RAIL
STEP 7
Insert support rails into brackets in top moulding of tower
but do not tighten at this time. Front and tower support
rails may have to be cut if they are too long.
NOTCH
GLASS PANEL
SUPPORT RAIL
BOLT (5/16")
STEP 8
WASHER
Slide mounting bracket covers and mounting brackets
onto front rail and tower support rail.
GLAZING
CHANNEL
9
GLASS PANEL
SUPPORT RAIL
TOWER SUPPORT RAIL
FRONT RAIL
MOUNTING
BRACKET
COVER
RAIL
RAIL WALL
MOUNTING BRACKET