1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. KDL-26S3000, KDL-32SL130, KDL-32S3000, KDL-40SL130, KDL-40S3000,...
  6. Service manual

Sony KDL-32SL130 Service Manual

Wax3 chassis lcd digital color television
Hide thumbs Also See for KDL-32SL130:
Table of Contents

Advertisement

Quick Links

See also: Training Manual , Instruction Manual
HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

SERVICE MANUAL

MODEL NAME
KDL-32SL130
KDL-40SL130
ORIGINAL MANUAL ISSUE DATE: 5/2007
: UPDATED ITEM
REVISION DATE
5/2007
6/2007
10/2007
9-883-752-03
REMOTE COMMANDER
RM-YD018
RM-YD018
SUBJECT
No revisions or updates are applicable at this time.
Reissue entire manual to correct model name.
Corrected P/N for KDL-32SL130 ETC-Inverter MT Board. Replaced Page 93.
Added Battery Cover P/N. Replaced Page 125.
WAX3
DESTINATION
US
US
LCD DIGITAL COLOR TELEVISION
CHASSIS

Advertisement

Table of Contents
loading

Related Manuals for Sony KDL-32SL130

Summary of Contents for Sony KDL-32SL130

  • Page 1: Service Manual

    No revisions or updates are applicable at this time. 6/2007 Reissue entire manual to correct model name. 10/2007 Corrected P/N for KDL-32SL130 ETC-Inverter MT Board. Replaced Page 93. Added Battery Cover P/N. Replaced Page 125. LCD DIGITAL COLOR TELEVISION 9-883-752-03...
  • Page 2 Self Diagnosis Supported model WAX3 SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KDL-32SL130 RM-YD018 KDL-40SL130 RM-YD018 KDL-40SL130 RM-YD018 LCD DIGITAL COLOR TELEVISION 9-883-752-03...

  • Page 3: Table Of Contents

    D1 Board Schematic Diagram (KDL-40SL130 Only) ... 76 (KDL-40SL130 Only) ..........16 G1H Board Schematic Diagram (Power Supply) 1-10. AC Inlet Removal (KDL-32SL130 Only) ....... 17 (KDL-32SL130 Only) ..........79 1-11. AC Inlet Removal (KDL-40SL130 Only) ....... 17 G3 Board Schematic Diagram (Power Supply) 1-12.

  • Page 4: Specifi Cations

    Trademark Information “BRAVIA” and , S-Force, BRAVIA Theatre Sync, and DMe trademarks or registered marks of Sony Corporation. Blu-ray Disc is a trademark. “XMB”, “XrossMediaBar” and “PS3” are trademarks of Sony Corporation and/or Sony Computer Entertainment Inc. This TV incorporates High-Definition Multimedia Interface (HDMI™) technology.
  • Page 5 Headphones Plug Adapter Panel System Connecting Cables LCD (Liquid Crystal Display) Panel Wall-Mount Bracket SU-WL500 Display Resolution (horizontal x vertical): TV Stand 1,366 dots x 768 lines RHT-G800 Screen Size (measured diagonally) 31.5 inches (KDL-32SL130 Only) 40 inches (KDL-40SL130 Only) KDL-32SL130/40SL130...

  • Page 6: Warnings And Cautions

    Les composants identifi es par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony.

  • Page 7: Safety-Related Component Warning

    KDL-32SL130/40SL130 SAFETY-RELATED COMPONENT WARNING There are critical components used in LCD color TVs that are important for safety. These components are identifi ed with shading and mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number specifi...
  • Page 8 Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com KDL-32SL130/40SL130...

  • Page 9: Safety Check-Out

    KDL-32SL130/40SL130 SAFETY CHECK-OUT The AC leakage from any exposed metal part to earth ground and After correcting the original service problem, perform the following from all exposed metal parts to any exposed metal part having a safety checks before releasing the set to the customer: return to chassis, must not exceed 0.5 mA (500 microamperes).

  • Page 10: Self-Diagnostic Function

    KDL-32SL130/40SL130 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED indicator will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 11 KDL-32SL130/40SL130 Viewing the Self Check Diagnostic List 1. TV must be in standby mode. (Power off). 2. Press the following buttons on the Remote Commander within a second of each other: Channel 5 Volume - TV POWER . DISPLAY The Self Check list displays.

  • Page 12: Section 1: Disassembly

    Remove 3 screws from Terminals, +BVTP 3X12 TYPE2 IT-3 Remove 2 screws (KDL-32SL130), 4 screws (KDL-40SL130) from Rear Cover arm positions, +PSW M5X16 Remove 14 screws (KDL-32SL130), 15 screws (KDL-40SL130), from Rear Cover, +BVTP2 4X16 Rear Cover 1-2. H1 BOARD REMOVAL Remove from bezel...

  • Page 13: Stand Assembly And Vesa Arm Assembly Removal (Kdl-32Sl130 Only)

    KDL-32SL130/40SL130 1-3. STAND ASSEMBLY AND VESA ARM ASSEMBLY REMOVAL (KDL-32SL130 ONLY) Remove 2 screws from bottom of Arms, +PSW M5X16 Remove 3 screws from bottom bracket and Stand, +PSW M5X16 VESA Arm Assembly Stand Assembly Under Cover Bottom Bracket 1-4. STAND ASSEMBLY AND VESA ARM ASSEMBLY REMOVAL (KDL-40SL130 ONLY)

  • Page 14: U1 Board, Side Terminal And Side Jack Holder Removal

    KDL-32SL130/40SL130 1-5. U1 BOARD, SIDE TERMINAL AND SIDE JACK HOLDER REMOVAL Disconnect one connector Remove one screw, +BVTP 3X12 TYPE2 IT-3 Release hooks and remove U1 Board. Remove Side Terminal from Bezel. Release hooks to remove Side Jack Holder from BU1 bottom shield.

  • Page 15: Speaker, H3 Board, And H4 Board Removal

    Baffle Assembly Disconnect one connector (KDL-40SL130 Only) Release hooks and remove H4 Board H3 Board H4 Board 1-8. G1H BOARD (POWER UNIT) AND G1 BRACKET REMOVAL (KDL-32SL130 ONLY) Remove 4 screws, +PSW 3SG Disconnect 3 connectors Power Unit G1 Bracket KDL-32SL130/40SL130...

  • Page 16: G3 Board (Power Unit) And D1 Board Removal (Kdl-40Sl130 Only)

    KDL-32SL130/40SL130 1-9. G3 BOARD (POWER UNIT) AND D1 BOARD REMOVAL (KDL-40SL130 ONLY) Disconnect 6 connectors Remove 4 screws, +PSW 3SG Disconnect 4 connectors Remove 4 screws, +PSW 3SG D1 Board G3 Board G3 Bracket 1-9-1. REPLACING THE INVERTER CONNECTOR ASSEMBLY (KDL-40SL130 ONLY) Use the following procedure to confirm that the Inverter connector is securely attached to the board.

  • Page 17: Ac Inlet Removal (Kdl-32Sl130 Only)

    KDL-32SL130/40SL130 1-10. AC INLET REMOVAL (KDL-32SL130 ONLY) Remove 2 screws, +BVTP2 4X16 Remove 2 screws, +KTT 3X10 Under Cover AC Inlet 1-11. AC INLET REMOVAL (KDL-40SL130 ONLY) Remove 2 screws, +BVTP2 4X16 Remove 2 screws, +KTT 3X10 Under Cover AC Inlet...

  • Page 18: Lcd Panel, Led And Guide Light Removal (Kdl-32Sl130 Only)

    KDL-32SL130/40SL130 1-12. LCD PANEL, LED AND GUIDE LIGHT REMOVAL (KDL-32SL130 ONLY) Remove 2 screws, +PSW M4X8 Remove 2 screws, +BVTP2 4X16 Remove 2 screws, +BVTP2 4X16 Remove 2 screws, +PSW M4X8 Remove 3 screws, +BVTP2 4X16 Remove ornamental panel and slide out LED Guide and Light Guide...

  • Page 19: Lcd Panel, Led And Guide Light Removal (Kdl-40Sl130 Only)

    KDL-32SL130/40SL130 1-13. LCD PANEL, LED AND GUIDE LIGHT REMOVAL (KDL-40SL130 ONLY) Remove 2 screws from Bezel and Top Brackets, +BVTP2 4X16 Remove 4 screws from Top Brackets, +PSW M5X8 Remove 4 screws from Bottom Brackets, + PSW M5X12 Remove 4 screws from Stand Holders, +PSW M5X16...

  • Page 20: Inverter Board Removal

    KDL-32SL130/40SL130 1-14. INVERTER BOARD REMOVAL CAUTION: Be sure to identify the inverter cover screws before proceeding. DO NOT remove the screws securing the plastic strip holding the lamp sockets. Remove screws securing the inverter cover. Remove screws securing the inverter board...

  • Page 21: Wire Dressing

    KDL-32SL130/40SL130 WIRE DRESSING KDL-32SL130 ONLY OVERALL VIEW KDL-32SL130/40SL130...
  • Page 22 Align top of UL tape with "Score Line" on Panel and center of "Circle" on Panel Frame. Make sure 1st tape is below himelon tape on panel edge. Use boss and SONY emblem hole on bezel to align UL tape on harness. KDL-32SL130/40SL130...
  • Page 23 KDL-32SL130/40SL130 KDL-32SL130 ONLY H4 BOARD OPERATION PROCESS 1. Install H4-Bd BEFORE Installing the speakers/baffles. 2. Apply LCD Tape on SIDE of the magnet on Rt. Speaker to hold the H4 Cables. 3. MAKE SURE there is slack in the cable between the H4 Connector and LCD Tape.
  • Page 24 KDL-32SL130/40SL130 KDL-32SL130 ONLY H4 BOARD AND RIGHT SPEAKER OPERATION PROCESS Wire Dress Rt. Speaker wires and H4 cables in G-Bracket clips (x3) Dress BOTH H4/Speaker Cables in 3 plastic NOTE: Rt. Spkr. Wires are NOT dressed clips on G-Bracket. in far LEFT G-Bracket clip! NOTE: Speaker cables are NOT dressed inside far left clip on G-Bracket.
  • Page 25 KDL-32SL130/40SL130 KDL-32SL130 ONLY H4 BOARD AND RIGHT SPEAKER (CONTINUED) OPERATION PROCESS 1. Wire Dress Right Speaker wires and H4 NOTE BOTH H4-Bd and Rt. Speaker cables cables in side clamp (white) and G3-Bd are dressed UNDER AC Inlet and in G-Brkt bracket clip (black).
  • Page 26 KDL-32SL130/40SL130 KDL-32SL130 ONLY CORE BLOCK HARNESS OPERATION PROCESS Route/Dress Harnesses connected to Core Block as Shown NOTE Order & Direction of Cables in plastic Clip on Shield Case. DRESS CABLES 1st DRESS CABLES LAST ON TOP ALL CABLES. DRESS CABLES 3rd...
  • Page 27 KDL-32SL130/40SL130 KDL-32SL130 ONLY CORE BLOCK HARNESS (CONTINUED) OPERATION PROCESS Route/Dress Core-Block cables as shown Put Attention on DIRECTION of cables in G-Bracket. Put Attention on the position of the Sheet Core C and routing of the Cables between Core Block and G1-Bracket.
  • Page 28 KDL-32SL130/40SL130 KDL-32SL130 ONLY G1H BOARD OPERATION PROCESS Install/Wire Dress Harnesses as shown. CAUTION: Make sure INVERTER CONN. is Fully LOCKED!! G1H- NOTE: NEW G-Bracket Change! Inverter wire is NOT dressed in 1st clip. Inverter wires are dressed in cut-out on...
  • Page 29 KDL-32SL130/40SL130 KDL-32SL130 ONLY SPEAKER HARNESS OPERATION PROCESS 1. Wire Dress Speaker Cables as shown. 2. BOTH R/L cables are dressed in FGC-3 conductive clip. 3. Apply LCD TAPE to BOTH H4-Bd AND Right Speaker Wires. TORQUE SPECIFICATION TORQUE: 6kg.cm (+-1.0kg.cm) Apply Sheet Core C to BOTH H4/H3 AND Right Speaker Wires.
  • Page 30 KDL-32SL130/40SL130 KDL-32SL130 ONLY LEFT SPEAKER HARNESS OPERATION PROCESS Dress LEFT speaker harness as shown PUSH SIDE CLAMP THIS DIRECTION TO LOCK!! Side Clamp Installed by SBC PLANT! KDL-32SL130/40SL130...
  • Page 31 KDL-32SL130/40SL130 KDL-32SL130 ONLY U1 BOARD OPERATION PROCESS 1. Apply Sheet Core A to Panel in location where U1 bracket is to be installed (Use edges of panel as guide) 2. Make sure DTT Shield has Sheet Core C installed as per diagram.
  • Page 32 KDL-32SL130/40SL130 KDL-32SL130 ONLY U1 BOARD (CONTINUED) OPERATION PROCESS 1. Wire route ESD GND wire as shown (NOTE: Actual Part will have RED insulation) 2. Use 3x12mm screw to fix ring terminal in U1 Bracket TORQUE SPECIFICATION 3mm TORQUE: 6.0kg-cm (+-1.0kg-cm)
  • Page 33 KDL-32SL130/40SL130 KDL-32SL130 ONLY H1 BOARD OPERATION PROCESS 1. Dress/Route H1-Bd harness as shown on photo. 2. NOTE: Put attention on SLACK of cable. Between Connector on H1 and tape there is slack in wire. Plastic Side Clamp. Between tape/clamp there is slack.
  • Page 34 KDL-32SL130/40SL130 KDL-32SL130 ONLY LVDS CABLE OPERATION PROCESS 1. Route 40P LVDS Cable between BU-Bd and TCON as shown. 2. Apply 3x8mm Screw (2-places) to ground LVDS cable. NOTE: LVDS Cable is UNDER G1/U-Bd cables Put Attention on Routing of Cable.
  • Page 35 KDL-32SL130/40SL130 KDL-32SL130 ONLY LVDS CABLE (CONTINUED) OPERATION PROCESS Route LVDS Harness from BU-Board (CN4500) as shown. CAUTION: Keep LVDS Wires AWAY from Memory IC and JIG Connectors! CAUTION: Keep LVDS Cables AWAY from JIG Connectors and Memory IC. KDL-32SL130/40SL130...
  • Page 36 KDL-32SL130/40SL130 KDL-32SL130 ONLY VESA BRACKET GROUND WIRE OPERATION PROCESS 3x5mm Attach ESD Grounding wire as shown Install screw to GND Tab shown. on panel above BH-Bd Shield Case. NOTE: 3x8mm AND 3x5mm Screws are used!! TORQUE SPECIFICATION TORQUE: 6.0kg.cm (+-1.0kg.cm)

  • Page 37: Kdl-40Sl130 Only

    KDL-32SL130/40SL130 KDL-40SL130 ONLY OVERALL VIEW × KDL-32SL130/40SL130...
  • Page 38 KDL-32SL130/40SL130 KDL-40SL130 ONLY H3 BOARD HARNESS OPERATION PROCESS 1. Apply Sheet Core C to edge of Panel to cover sharp edge of panel. Use ribs on bezel (w/o screw boss) as a guide to center tape. Use H3/H4 Harness "Split" as reference for top of Cushion D Position 2.
  • Page 39 KDL-32SL130/40SL130 KDL-40SL130 ONLY H4 BOARD OPERATION PROCESS 1. H4-Bd should be installed BEFORE the speaker/baffles are installed 2. Be careful to align Plastic clip at left side of bezel with notch in PWB. 3. PRESS FIRMLY on PWB next to clip to seat H4-Bd.
  • Page 40 KDL-32SL130/40SL130 KDL-40SL130 ONLY H4 BOARD AND RIGHT SPEAKER OPERATION PROCESS Wire Dress Right Speaker wires and H4 cables in side clamp (white) and G3-Bd bracket clips (black). NOTE: ALL Wires are dressed in far left G-Bracket clip! NOTE: Keep H4 cables AWAY From INVERTER BOARD AREA! NOTE: H4-Bd/Rt.
  • Page 41 KDL-32SL130/40SL130 KDL-40SL130 ONLY H4 BOARD AND RIGHT SPEAKER (CONTINUED) OPERATION PROCESS NOTE BOTH H4-Bd and Rt. Speaker cables 1. Dress H4/Rt. Speaker cables in white are dressed UNDER AC Inlet side clips. 2. Dress AC Inlet Cables in Plastic clip on the G-Bracket as shown.
  • Page 42 KDL-32SL130/40SL130 KDL-40SL130 ONLY CORE BLOCK HARNESS OPERATION PROCESS Route/Dress Harnesses connected to Core Block as Shown NOTE Order & Direction of Cables in plastic Clip on Shield Case. Route 1st Route 3rd Route LAST Keep Cables BELOW level of Shield Case (Pinch Points)
  • Page 43 KDL-32SL130/40SL130 KDL-40SL130 ONLY CORE BLOCK HARNESS (CONTINUED) OPERATION PROCESS Route/Dress Core-Block cables as shown Put Attention on the position of Sheet Core C and the routing of the cables between G3-Bd and Core Block. Apply Sheet Core C to dress cables.
  • Page 44 KDL-32SL130/40SL130 KDL-40SL130 ONLY INVERTER BOARD AND D1 BOARD OPERATION PROCESS INVERTER INVERTER CAUTION MAKE SURE BLACK INSULATION O.K. N.G. TUBING DOES NOT TOUCH CONN BEFORE INSTALLING 2P MD CONN. AFTER INSTALLING CONNECTOR, TUBE INSULATION CAN TOUCH CONNECTOR! INSTALL INVERTER SIDE 1ST INSTALL D1-Bd SIDE 2ND O.K.
  • Page 45 KDL-32SL130/40SL130 KDL-40SL130 ONLY INVERTER BOARD AND D1 BOARD (CONTINUED) OPERATION PROCESS INVERTE CAUTION: MAKE SURE WHITE/PINK WIRES DO NOT CROSS CHECK INVERTER SIDE WIRES CHECK D1-Bd SIDE WIRES CAUTION: Make Sure Inverter Connector DOES NOT CROSS WHITE/PINK WIRES! CHECK BOTH SIDES OF HARNESS!
  • Page 46 KDL-32SL130/40SL130 KDL-40SL130 ONLY G3 BOARD AND D1 BOARD OPERATION PROCESS Install/Wire Dress Harnesses as shown. NOTE: Ferrite Core and Sheet Core A CAUTION: Make sure INVERTER CONN. Applied by SBC Plants. is Fully LOCKED!! CAUTION: Make Sure Inverter Connector is Fully LOCKED!
  • Page 47 KDL-32SL130/40SL130 KDL-40SL130 ONLY D1 BOARD AND INVERTER BOARD CAUTION OPERATION PROCESS MAKE SURE COLOR of UL tape is the correct color (YELLOW) for harness. Confirm wires are dressed properly in clips. Confirm 2P BD Connectors are FULLY LOCKED by pressing on BOTH locking tabs (RED ARROWS).
  • Page 48 KDL-32SL130/40SL130 KDL-40SL130 ONLY SPEAKER CABLES OPERATION PROCESS 1. Wire Dress Speaker Cables as shown. Lft. Speaker cable is dressed in side clamp (white plastic). 2. BOTH R/L cables are dressed in FGC-3 conductive clip. TORQUE SPECIFICATION TORQUE: 6kg.cm (+-1.0kg.cm) Lft. SPEAKER Cables...
  • Page 49 KDL-32SL130/40SL130 KDL-40SL130 ONLY LEFT SPEAKER HARNESS OPERATION PROCESS Dress LEFT speaker harness as shown Side Clamp Installed by Vendor. PUSH SIDE CLAMP THIS DIRECTION TO LOCK!! Side Clamp Installed by SBC PLANT! KDL-32SL130/40SL130...
  • Page 50 KDL-32SL130/40SL130 KDL-40SL130 ONLY U1 BOARD OPERATION PROCESS 1. Apply Sheet Core A to Panel in location where U2 bracket is to be installed (Use plastic ribs on bezel as guide) 2. Make sure DTT Shield has Sheet Core C Align with center of circles on Install Sheet Core C on "dimple"...
  • Page 51 KDL-32SL130/40SL130 KDL-40SL130 ONLY U1 BOARD (CONTINUED) OPERATION PROCESS 1. Wire route ESD GND wire as shown (NOTE: Actual Part will have BLUE insulation) 2. Use 3x12mm screw to fix ring terminal in U1 Bracket 3. Apply Sheet Core C to hold cable on panel.
  • Page 52 KDL-32SL130/40SL130 KDL-40SL130 ONLY H1 BOARD OPERATION PROCESS 1. Dress/Route H1-Bd harness as shown on photo. 2. NOTE: Put attention on SLACK of cable. Between Connector on H1 and tape there is slack in wire. Between tapes there is a little slack.
  • Page 53 KDL-32SL130/40SL130 KDL-40SL130 ONLY LVDS CABLE OPERATION PROCESS 1. Route 40P LVDS Cable between BU-Bd and TCON as shown. 2. Apply 3x8mm Screw (2-places) to ground LVDS cable. G1 to BU cables are on TOP of LVDS. H3-Bd cables are UNDER LVDS.
  • Page 54 KDL-32SL130/40SL130 KDL-40SL130 ONLY LVDS CABLE (CONTINUED) OPERATION PROCESS Route LVDS Harness from BU-Board (CN4500) as shown. CAUTION: Keep LVDS Wires AWAY from Memory IC and JIG Connectors! CAUTION: Keep LVDS Cables AWAY from JIG Connectors and Memory IC. KDL-32SL130/40SL130...

  • Page 55: Section 2: Service Adjustments

    KDL-32SL130/40SL130 SECTION 2: SERVICE ADJUSTMENTS 2-1. USING THE REMOTE COMMANDER 2-3. VIEWING THE SERVICE MENUS FOR ELECTRICAL ADJUSTMENTS Use the Remote Commander to view the BE and Digital service menus options. To adjust various set features, use the Remote Commander to put the set into service mode to display the service menus and categories.

  • Page 56: Using The Remote Commander To View Service Data

    KDL-32SL130/40SL130 2-4. USING THE REMOTE COMMANDER TO 1. Access Service Adjustment Mode and select the Service Menu that contains the Category with the Adjustment Item you want to change. VIEW SERVICE DATA 2. To change the Category, press 2 or 5 on the Remote Commander.

  • Page 57: Verifying Service Data Changes

    KDL-32SL130/40SL130 2-5. VERIFYING SERVICE DATA CHANGES 1. After completing all adjustments turn the set off with the Remote Commander and then proceed to the next step. 2. Press the following buttons on the Remote Commander within a second of each other:...

  • Page 58: Section 3: Diagrams

    KDL-32SL130/40SL130 SECTION 3: DIAGRAMS 3-1. CIRCUIT BOARDS LOCATION (KDL-32SL130 Only) POWER UNIT (KDL-40SL130 Only) KDL-32SL130/40SL130...

  • Page 59: Printed Wiring Boards And Schematic Diagrams Information

    KDL-32SL130/40SL130 3-2. PRINTED WIRING BOARDS AND Terminal name of semiconductors in silk screen SCHEMATIC DIAGRAMS INFORMATION printed circuit ( All capacitors are in μF unless otherwise noted. pF : μμF 50WV or Circuit Device Printed symbol Terminal name Collector less are not indicated except for electrolytics and tantalums.

  • Page 60: Block Diagram

    KDL-32SL130/40SL130 3-3. BLOCK DIAGRAM SIGNAL FLOW DIAGRAM Audio Audio Audio Audio HDMI HDMI HDMI HDMI for PC for PC for DVI for DVI UART 8bit Multiplex BUS 4M x 32bit BE Micro MB91305 Flash Panel NAND NAND Flash Flash DDR2...

  • Page 61: Connection Diagram (Kdl-32Sl130 Only)

    KDL-32SL130/40SL130 CONNECTION DIAGRAM (KDL-32SL130 ONLY) TO PANEL CN101 Left INV. CN2-CN9 CN4500 CN4003 CN6202 CN4002 TO PANEL CN6201 CN4001 CN3008 CN201 CN1400 CN2000 CN401 CN301 KDL-32SL130/40SL130...

  • Page 62: Connection Diagram (Kdl-40Sl130 Only)

    KDL-32SL130/40SL130 CONNECTION DIAGRAM (KDL-40SL130 ONLY) CN6950 CN6704 CN6900 CN128 CN6700 TO PANEL CN6951 CN226 CN101 CN125 CN6701 Right Left CN6600 CN6707 INV. INV. CN225 CN6204 CN6502 CN126 CN6501 CN4500 CN4003 TO PANEL CN6203 CN4002 TO PANEL CN6202 CN4001 CN3008 CN201...

  • Page 63: Schematics And Supporting Information

    KDL-32SL130/40SL130 3-4. SCHEMATICS AND SUPPORTING INFORMATION BU1 BOARD SCHEMATIC DIAGRAM (1 OF 12) A _V 1_IN_C,A _V 1_IN_S2SW,A _V 1_IN_SSW,A _V 1_IN_V ,A _V 1_IN_Y R 1003 1/16W CHIP A_V 1_IN_Y R 1001 R 1002 R 1000 C 1000 0 . 0 1...

  • Page 64: Bu1 Board Schematic Diagram (2 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (2 OF 12) A_HP_OUT_R A_HP_OUT_L AUDIO_9V A_SP_OUT_R MUTE_AU13V A_SP_OUT_L PQ200WNA1ZPH — A_LINE_OUT_R I C 2005 AU_13V A_LINE_OUT_L AUDIO_13V TAS ANALOG 3.3V R 2202 L 2016 F 2000 22uH 1/16W C 2123 CHIP D3.3V D2014 C 2121 C 2159 0.

  • Page 65: Bu1 Board Schematic Diagram (3 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (3 OF 12) << ST B Y 3.3V >> ST B Y 3.3V M24256-BWMN6TP(A) RESET R 3167 I C 3005 X 3009 1/16W EEPROM 32. 768kH z R 3144 — 2 . 2 k CHIP...

  • Page 66: Bu1 Board Schematic Diagram (4 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (4 OF 12) JL 4508 TMDS_RX0- Y_G1 R X 0- TO HDMI JL 4509 TMDS_RX0+ PB_B1 RX0+ JL 4510 •¡ SV P-PX P DDR & CPU I/F, POWE R & GND PB_R1 TMDS_RX1- — R X 1-...

  • Page 67: Bu1 Board Schematic Diagram (5 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (5 OF 12) — MD[19] VDDMQO C 4902 MD[16] C 4904 1005 1005 MD[18] FL 4901 0 . 0 1 0 . 0 1 — MD[17] R B 4904 L 4901 R 4900 C 4906 6.

  • Page 68: Bu1 Board Schematic Diagram (6 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (6 OF 12) T O T ri dent PC-R JL 5007 FB 5001 0uH PC_R PC_R PC-G R 5021 FB 5002 0uH 1/10W D 3.3V -2 RN-CP FB 5000 0uH PC-B PC_G PC_G — J5000...

  • Page 69: Bu1 Board Schematic Diagram (7 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (7 OF 12) ST B Y 3.3V R 4048 FB 4011 1/10W L FB K 1608HS601 RN-CP 0.5% FB 4005 D3.3V R 4047 — STBY 3.3V 2 . 2 k DIMMER DIMMER 1/16W FB 4009...

  • Page 70: Bu1 Board Schematic Diagram (8 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (8 OF 12) D2.5V — C 7077 1608 R 7047 C 7047 2 . 2 k 220p 1/16W RN-CP 0.5% R 7059 REG12V — 1/16W CHIP R 7035 R 7041 R 7048 R 7055 3 . 3 k...

  • Page 71: Bu1 Board Schematic Diagram (9 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (9 OF 12) X IL L EON242 GROUND BAL L S ASIC CORE POWER D2.5V _A T I D1.0V D3.3V _A T I COR E _1.0V (NE E D <50mV NOI SE ) — FB 7200...

  • Page 72: Bu1 Board Schematic Diagram (10 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (10 OF 12) — MEMORY CONFIGURATION VDDR_MEM DDR _1.8V DRAM_IF DDR2 SDRAM WAX 3 L 7431 MEM_DQA0 I C 7400 R 24 * C 7430 C 7431 DQA_0 HY B 18T C512160B F-2.5 0 . 1...

  • Page 73: Bu1 Board Schematic Diagram (11 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (11 OF 12) DIGITAL GR APHICS OUT (DDR ) — GRAPHICS DDR->SDR LATCH EGPHSI EGPHSI D3.3V FB 7601 DV I_IF EGPV SI EGPV SI C 7611 — DVIDATA0 EGPPCI EGPPCI T C74V CX 162374(E L ,F...

  • Page 74: Bu1 Board Schematic Diagram (12 Of 12)

    KDL-32SL130/40SL130 BU1 BOARD SCHEMATIC DIAGRAM (12 OF 12) V IDEO_IF FRONT_END_IF — R 7712 R 7710 1/16W V I _I N0 CHIP R 7706 1/16W * C 7818 L 7801 C 7828 V I _I N1 C 7821 C 7823...
  • Page 75 KDL-32SL130/40SL130 [I/O JACKS, AUDIO, MAIN MICRO CONTROLLER, TRIDENT, DDR_SDRAM 128 MBIT, HDMI EPC, POWER EDC_ALERT, POWER, RESET, X242 POWER, PLL, FLEXBUS, USB, PERIPHERALS, DDR, FLASH, NVM, DIGITAL IF, EJTAG, AVOUT, FE, TUNER] [I/O JACKS, AUDIO, MAIN MICRO CONTROLLER, TRIDENT, DDR_SDRAM 128 MBIT, HDMI EPC, POWER EDC_ALERT, POWER, RESET, X242 POWER, PLL, FLEXBUS, USB, PERIPHERALS, DDR, FLASH, NVM, DIGITAL IF, EJTAG, AVOUT, FE, TUNER]...

  • Page 76: D1 Board Schematic Diagram (Kdl-40Sl130 Only)

    KDL-32SL130/40SL130 D1 BOARD SCHEMATIC DIAGRAM (KDL-40SL130 ONLY) — CN6600 3 9 2 . 0 TO G3 PFC_OUT CN6502 L6600 PRI_GND 100uH C6600 450V R6700 4 . 7 1/10W — RN-CP VCC_12V C6709 6 . 3 k V D6701 D6704 R6706...
  • Page 77 KDL-32SL130/40SL130 [INVERTER] COMPONENT SIDE (KDL-40SL130 ONLY) CN6702 CN6700 JW6702 R6804 JW6743 JW6703 T6801 JW6756 EY6700 EY6701 EY6702 EY6703 T6600 EY6704 EY6705 EY6706 EY6707 C6759 JW6710 00_8 JW6735 JW6754 BALANCER_ERR REG12V JW6755 0-000-000-08 INV_ERR BACK_LIGHT (000000008) DIMMER ET6701 JW6731 JW6738 JW6757...
  • Page 78 KDL-32SL130/40SL130 [INVERTER] CONDUCTOR SIDE (KDL-40SL130 ONLY) CN6702 D6705 D6704 CN6700 C6712 JR6704 C6714 D6703 ET6700 C6707 C6706 R6763 JR6717 Q6716 C6742 R6822 D6702 JL6708 R6755 R6823 C6786 C6609 C6735 R6821 R6804 Q6714 JL6717 JL6718 C6745 IC6702 C6759 JL6715 BALANCER _ERR...

  • Page 79: G1H Board Schematic Diagram (Power Supply) (Kdl-32Sl130 Only)

    KDL-32SL130/40SL130 G1H BOARD SCHEMATIC DIAGRAM (POWER SUPPLY) (KDL-32SL130 ONLY) This board is manufactured by a 3rd party. Component level repair information is not available. [POWER SUPPLY] PWB IS NOT AVAILABLE KDL-32SL130/40SL130...

  • Page 80: G3 Board Schematic Diagram (Power Supply) (Kdl-40Sl130 Only)

    KDL-32SL130/40SL130 G3 BOARD SCHEMATIC DIAGRAM (POWER SUPPLY) (KDL-40SL130 ONLY) Mount Mecha A6000 214976631 D6000 L6501 t @ X g 300uH C6515 C6516 R6106 L6150 Mount Mecha A6150 234989201 D6151 CN6003 470p 470p R6524 R6014 C6019 6 . 8 1/10W 0 . 0 1...
  • Page 81 KDL-32SL130/40SL130 [POWER SUPPLY] [POWER SUPPLY] COMPONENT SIDE (KDL-40SL130 ONLY) COMPONENT SIDE (KDL-40SL130 ONLY) A6003 CN6004 CN6004 A6002 A6003 A6002 A- 1221- ET6000 FB6001 FB6001 EY6517 C6157 T6100 CN6204 T6100 CN6204 A6017 C6023 PS6152 C6023 PS6152 CN6501 CN6502 CN6502 CN6501 JL6156...

  • Page 82: H1 Board Schematic Diagram

    KDL-32SL130/40SL130 H1 BOARD SCHEMATIC DIAGRAM POWER — H1 BOARD S101 USER CONTROL — HOME INPUT SEL VOL+ VOL- MENU TO BU1 WEGAGATE POWER INT CN3008 KEY1 — R107 R102 CN101 S104 S107 S106 S105 S103 S102 — R104 R101 R105 R103 1 .
  • Page 83 KDL-32SL130/40SL130 [USER CONTROL] COMPONENT SIDE VOL+ R102 S104 VOL- VIA G[CV OK S105 R103 INPUT SEL S103 R108 S106 R101 R107 S107 R104 S101 POWER S102 HOME 1-872-981-11 A-1220- MENU C103 (172841011) WEGAGATE [USER CONTROL] CONDUCTOR SIDE CN102 CN101 JL101...

  • Page 84: H3 Board Schematic Diagram

    KDL-32SL130/40SL130 H3 BOARD SCHEMATIC DIAGRAM STBY3.3V REC/RESERVE STBY_LED — TO BU1 CN3008 ON_TIMER PWR/RESERVE PICTURE_OFF R303 R304 R305 BL_IN R301 R302 2 . 2 k 1/10W 1/10W 1/10W RN-CP 1/10W 1/10W RN-CP RN-CP VD3.3V RN-CP RN-CP — D305 D302 CN301...
  • Page 85 KDL-32SL130/40SL130 [OPTICAL SENSOR, LED] COMPONENT SIDE TIMER D308 (172841011) Optical 1-872-982-11 Sensor PICOFF R302 JL305 DATA STBY R303 TREC C320 R301 IC320 A-1220-319-A R304 [OPTICAL SENSOR, LED] CONDUCTOR SIDE Q304 EP-(GW+GN) D306 D303 1-872-982-11 CN301 C323 R325 R326 D301 R322...

  • Page 86: H4 Board Schematic Diagram

    KDL-32SL130/40SL130 H4 BOARD SCHEMATIC DIAGRAM GP1UE26RK0VF IC401 — SIRCS TO BU1 STBY3.3V CN3008 — R402 C402 R401 1/10W 6 . 3 V 1/10W RN-CP CN401 RN-CP 2012 H 4 S i r c s C401 — 220p 1608 A-1220-320-A <WAX3>H4 —...
  • Page 87 KDL-32SL130/40SL130 [SIRCS] COMPONENT SIDE 1-873-380-11 A-1220 -320-A EP-(GW+GN) [SIRCS] CONDUCTOR SIDE R402 KDL-32SL130/40SL130...

  • Page 88: U1 Board Schematic Diagram

    KDL-32SL130/40SL130 U1 BOARD SCHEMATIC DIAGRAM C218 1000p 1608 J202 — R219 R220 C215 VD201 1000p CHIP CHIP 1608 VD202 VD203 D3.3V GND_D — R203 V2_IN_AU_L 1/10W RN-CP D3.3V R200 R201 R202 C200 AU_IN_GND 0 . 0 1 VD206 1/10W 1/10W...
  • Page 89 KDL-32SL130/40SL130 [VIDEO IN 2] COMPONENT SIDE J201 JL205 JL205 JL203 JL203 JL204 JL204 JL209 JL209 (172841113) 1-872-983-13 JL211 JL211 [VIDEO IN 2] CONDUCTOR SIDE J201 J201 D202 D202 cam3 cam3 JL206 JL206 R205 R205 C201 C201 R221 R221 JL208 JL208...

  • Page 90: Semiconductors

    KDL-32SL130/40SL130 3-5. SEMICONDUCTORS – KDL-32SL130/40SL130...

  • Page 91: Section 4: Exploded Views

    REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] (Please review the Sony Electronics Service Information website for any additional service information.) 3-097-972-01 COVER, REAR (32) A-1273-109-A STAND (M_WS)ASSEMBLY [7-8] (KDL-32SL130 ONLY) (KDL-32SL130 ONLY) 7-685-648-79...

  • Page 92: Chassis

    See Appendix A: Encryption Key Components in the back of this manual. 4-2. CHASSIS (Please review the Sony Electronics Service Information website for any additional service information.) 2-580-640-01 SCREW, +BVTP2 4X16 2-580-629-01...

  • Page 93: Bezel Assembly And Lcd Panel

    See Appendix A: Encryption Key Components in the back of this manual. 4-3. BEZEL ASSEMBLY AND LCD PANEL (Please review the Sony Electronics Service Information website for any additional service information.) 2-580-640-01 SCREW, +BVTP2 4X16 REF. NO.

  • Page 94: Connectors (Kdl-32Sl130 Only)

    See Appendix A: Encryption Key Components in the back of this manual. 4-5. CONNECTORS (KDL-32SL130 ONLY) (Please review the Sony Electronics Service Information website for any additional service information.) REF.

  • Page 95: Connectors (Kdl-40Sl130 Only)

    See Appendix A: Encryption Key Components in the back of this manual. 4-6. CONNECTORS (KDL-40SL130 ONLY) (Please review the Sony Electronics Service Information website for any additional service information.) REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF.

  • Page 96: Speakers

    See Appendix A: Encryption Key Components in the back of this manual. 4-7. SPEAKERS (Please review the Sony Electronics Service Information website for any additional service information.) 2-580-640-01 SCREW, +BVTP2 4X16 2-580-600-01...

  • Page 97: Section 5: Electrical Parts List

    CERAMIC CHIP 1μF C1725 1-100-912-11 CERAMIC CHIP 1μF A-1257-244-A BU1 BOARD, MOUNTED (SVC) C2013 1-126-392-11 ELECT CHIP 100μF 6.3V (KDL-32SL130 ONLY) C2014 1-100-905-11 CERAMIC CHIP 0.001μF 10% A-1257-243-A BU1 BOARD, MOUNTED (SVC) C2016 1-112-046-11 CERAMIC CHIP 4.7μF 6.3V (KDL-40SL130 ONLY)
  • Page 98 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C2070 1-112-064-11 CERAMIC CHIP 2.2μF C2132 1-115-340-11 CERAMIC CHIP 0.22μF C2073 1-114-330-11 CERAMIC CHIP 2.2μF C2133 1-115-340-11 CERAMIC CHIP 0.22μF C2134 1-112-064-11 CERAMIC CHIP 2.2μF C2074 1-100-764-21 ELECT CHIP 4.7μF...
  • Page 99 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C3012 1-100-905-11 CERAMIC CHIP 0.001μF 10% C4041 1-112-774-11 CERAMIC CHIP 470pF C3014 1-100-906-11 CERAMIC CHIP 0.01μF C4042 1-112-774-11 CERAMIC CHIP 470pF C4043 1-112-774-11 CERAMIC CHIP 470pF C3015...
  • Page 100 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C4726 1-100-916-11 CERAMIC CHIP 0.1μF C4917 1-164-874-11 CERAMIC CHIP 100pF C4730 1-100-905-11 CERAMIC CHIP 0.001μF 10% C4918 1-164-874-11 CERAMIC CHIP 100pF C4919 1-164-874-11 CERAMIC CHIP 100pF C4731...
  • Page 101 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7012 1-100-916-11 CERAMIC CHIP 0.1μF C7059 1-165-908-11 CERAMIC CHIP 1μF C7013 1-114-214-81 CERAMIC CHIP 470pF C7060 1-165-908-11 CERAMIC CHIP 1μF C7061 1-114-325-11 CERAMIC CHIP 0.1μF C7015 1-100-905-11 CERAMIC CHIP 0.001μF 10%...
  • Page 102 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7207 1-100-916-11 CERAMIC CHIP 0.1μF C7252 1-100-916-11 CERAMIC CHIP 0.1μF C7208 1-126-210-21 ELECT CHIP 220μF C7253 1-100-916-11 CERAMIC CHIP 0.1μF C7254 1-100-916-11 CERAMIC CHIP 0.1μF C7209 1-100-916-11 CERAMIC CHIP 0.1μF...
  • Page 103 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7410 1-100-916-11 CERAMIC CHIP 0.1μF C7720 1-165-908-11 CERAMIC CHIP 1μF C7411 1-114-130-11 CERAMIC CHIP 1μF 6.3V C7800 1-100-916-11 CERAMIC CHIP 0.1μF C7801 1-100-916-11 CERAMIC CHIP 0.1μF C7412...
  • Page 104 KDL-32SL130/40SL130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 105 KDL-32SL130/40SL130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 106 KDL-32SL130/40SL130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 107 KDL-32SL130/40SL130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 108 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES Q7804 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF R1116 1-218-957-11 RES-CHIP 2.2K 1/16W Q7805 6-551-699-01 TRANSISTOR ISA1602AM1TP-1EF R1117 1-218-989-11 RES-CHIP 1/16W R1132 1-218-831-11 METAL CHIP 0.50% 1/10W Q7806 8-729-620-13 TRANSISTOR 2SC4154TP-1EF...
  • Page 109 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2049 1-218-990-81 SHORT CHIP R2133 1-208-715-11 METAL CHIP 0.50% 1/16W R2050 1-218-989-11 RES-CHIP 1/16W R2138 1-218-985-11 RES-CHIP 470K 1/16W R2139 1-218-985-11 RES-CHIP 470K 1/16W R2056 1-218-963-11 RES-CHIP 6.8K...
  • Page 110 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2227 1-208-691-11 METAL CHIP 2.2K 0.50% 1/16W R3069 1-218-941-81 RES-CHIP 1/16W R2228 1-208-703-11 METAL CHIP 6.8K 0.50% 1/16W R3070 1-218-941-81 RES-CHIP 1/16W R3101 1-218-959-11 RES-CHIP 3.3K 1/16W...
  • Page 111 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R3263 1-400-591-22 FERRITE 0μH R4529 1-218-937-11 RES-CHIP 1/16W R3264 1-400-591-22 FERRITE 0μH R4530 1-218-953-11 RES-CHIP 1/16W R4532 1-218-941-81 RES-CHIP 1/16W R3265 1-400-591-22 FERRITE 0μH R3266 1-216-864-11 SHORT CHIP...
  • Page 112 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R5013 1-218-827-11 METAL CHIP 0.50% 1/10W R5591 1-208-695-11 METAL CHIP 3.3K 0.50% 1/16W R5014 1-218-827-11 METAL CHIP 0.50% 1/10W R5592 1-208-695-11 METAL CHIP 3.3K 0.50% 1/16W R5593...
  • Page 113 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R7039 1-208-715-11 METAL CHIP 0.50% 1/16W R7091 1-216-295-91 SHORT CHIP R7040 1-208-715-11 METAL CHIP 0.50% 1/16W R7092 1-208-721-11 METAL CHIP 0.50% 1/16W R7093 1-208-927-11 METAL CHIP 0.50% 1/16W...
  • Page 114 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R7501 1-218-957-11 RES-CHIP 2.2K 1/16W R7808 1-218-949-11 RES-CHIP 1/16W R7506 1-218-965-11 RES-CHIP 1/16W R7814 1-218-941-81 RES-CHIP 1/16W R7819 1-218-941-81 RES-CHIP 1/16W R7507 1-218-965-11 RES-CHIP 1/16W R7508 1-218-977-11...
  • Page 115 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R7974 1-218-941-81 RES-CHIP 1/16W RB4512 1-239-698-11 RESISTOR, NETWORK 10K R7975 1-218-941-81 RES-CHIP 1/16W RB4701 1-234-372-11 RES, NETWORK 100 (1005X4) RB4702 1-234-372-11 RES, NETWORK 100 (1005X4) R7978 1-218-989-11...
  • Page 116 KDL-32SL130/40SL130 BU1 D1 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES RB7801 1-239-674-81 RESISTOR, NETWORK 100 VD5520 1-802-417-11 SURGE ABSORBER RB7802 1-234-795-21 RES, NETWORK 0X4 (2010) VD5522 1-802-417-11 SURGE ABSORBER VD5523 1-802-417-11 SURGE BSORBER VD5524 1-802-417-11...
  • Page 117 KDL-32SL130/40SL130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C6718 1-162-970-11 CERAMIC CHIP 0.01μF DIODE C6719 1-164-315-11 CERAMIC CHIP 470pF D6608 8-719-041-97 DIODE MA113-(TX) C6720 1-162-964-11 CERAMIC CHIP 0.001μF 10% D6609 8-719-041-97 DIODE MA113-(TX) C6721 1-165-908-11 CERAMIC CHIP 1μF...
  • Page 118 KDL-32SL130/40SL130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 119 C6157 1-112-231-21 ELECT 2200μF 1-474-052-11 G1H BOARD, COMPLETE (POWER SUPPLY) C6160 1-162-970-11 CERAMIC CHIP 0.01μF (KDL-32SL130 ONLY) C6170 1-112-231-21 ELECT 2200μF This board is manufactured by a 3rd party. C6200 1-107-826-11 CERAMIC CHIP 0.1μF Component level repair information is not available.
  • Page 120 KDL-32SL130/40SL130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 121 KDL-32SL130/40SL130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 122 KDL-32SL130/40SL130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 123 KDL-32SL130/40SL130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only H1 H3 que par une piece portant le numero specifi e.
  • Page 124 KDL-32SL130/40SL130 H3 H4 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES TRANSISTOR Q301 8-729-028-96 TRANSISTOR DTC114EUA-T106 Q302 8-729-028-96 TRANSISTOR DTC114EUA-T106 Q303 8-729-028-96 TRANSISTOR DTC114EUA-T106 A-1220-504-C U1 BOARD, MOUNTED Q304 8-729-028-96 TRANSISTOR DTC114EUA-T106 Q305 8-729-028-96 TRANSISTOR DTC114EUA-T106...
  • Page 125 PART NO. DESCRIPTION VALUES R216 1-216-825-11 METAL CHIP 2.2K 1/10W 2-595-155-02 CLAMP R218 1-216-864-11 SHORT CHIP 2-319-961-02 CUSHION, LOWER (KDL-32SL130 ONLY) R219 1-216-864-11 SHORT CHIP R220 1-216-864-11 SHORT CHIP 2-319-966-02 CUSHION, LOWER R222 1-216-864-11 SHORT CHIP (KDL-40SL130 ONLY) 2-319-960-01 CUSHION, UPPER...

  • Page 126: Appendix A: Encryption Key Components

    MUST BE RETURNED to Sony. b) and if the core charge is NOT covered under the product warranty, the defective un-repaired or modifi...
  • Page 127 In an effort to reduce the size of this pdf fi le the tiled schematics are not attached to this Service Manual. To receive a complete set of the tiled schematics for this manual please submit a request to the Service Promotion Department at Service_Promotion@am.sony.com.

This manual is also suitable for:

Kdl-40sl130

Table of Contents