Sony KDL-32SL130 Service Manual page 22

KDL-32SL130 ONLY
H3 BOARD HARNESS
3
1
Use boss and SONY emblem hole
on bezel to align UL tape on harness.
KDL-32SL130/40SL130
Use Ribs on Bezel as Reference to
position Sheet Core C on Panel edge.
Align top of UL tape with
"Score Line" on Panel and
center of "Circle" on Panel
Frame.
Make sure 1st tape is below
himelon tape on panel edge.
Center Cushion D over Wires.
Align Cushion D w/edge of panel.
2
KDL-32SL130/40SL130
OPERATION PROCESS
1. Apply Sheet Core C to edge of Panel to
cover sharp edge of panel.
2. Align H3 harness as shown in photo. Take
caution not to create tension on the H3
connector! Connector will unlock.
3. Apply Cushion D as shown in 3rd photo.
22